Home The Word Brain	My Amedeo FAQ Privacy About
	Amedeo C49 English + 你好 (nǐ hǎo) = limitless possibilities. Start learning Mandarin Chinese today—for free, forever. Amedeo C49 is completely free, for life. Next week: +49.

Dental Implants

Free Subscription Articles published in J Prosthet Dent Retrieve available abstracts of 516 articles: HTML format

Single Articles

October 2025
1. BALLESTEROS J, Vasquez-Ramos S, Revilla-Leon M, Gomez-Polo M, et al
   Immediate placement of a previously manufactured interim screw-retained implant-supported crown by using the implant position determined in the guided implant planning.
   J Prosthet Dent. 2025;134:908-913.
   PubMed     Abstract available
   
   
   
2. KOROGLU EN, Turker Kader I, Albayrak B, Koksal M, et al
   Effect of mechanical aging and steam autoclaving on the accuracy of different mechanical torque limiting devices.
   J Prosthet Dent. 2025;134:1188.
   PubMed     Abstract available
   
   
   
3. RUBIANES-PORTA L, Traver-Mendez V, Ghiorghiu R, Piera-Auguet J, et al
   Impact of implant-abutment connection design on biological and mechanical outcomes in posterior single-tooth restorations: A randomized clinical trial.
   J Prosthet Dent. 2025;134:1140-1147.
   PubMed     Abstract available
   
   
   
4. MOLINERO-MOURELLE P, Limones A, Mosaddad SA, Rivero-Gonzalez MA, et al
   Content evaluation of YouTube videos on immediate placement and loading of implant-supported complete arch prostheses: A quality assessment.
   J Prosthet Dent. 2025;134:1197.
   PubMed     Abstract available
   
   
   
5. WANG Y, Chen J, Zhang Y, Yan Q, et al
   Optimized design of a tooth-simulating screw for enhanced accuracy in robot-assisted implant placement in completely edentulous jaws.
   J Prosthet Dent. 2025;134:1196.
   PubMed     Abstract available
   
   
   
6. SKVIRSKY Y, Giladi HZ, Rizzante FAP, Teich ST, et al
   Measurements of trueness and precision of various dental torque wrenches: An in vitro study.
   J Prosthet Dent. 2025;134:1187.
   PubMed     Abstract available
   
   
   
7. REVILLA-LEON M, Cascos R, Barmak AB, Kois JC, et al
   Alignment accuracy of soft tissue and implant position scans captured by using four intraoral scanners and an intraoral photogrammetry system with and without coded healing abutments.
   J Prosthet Dent. 2025;134:1259.
   PubMed     Abstract available
   
   
   
8. WANG H, Zou J, Lyu W, Li L, et al
   In situ replacement of a failed implant to rescue a complete arch fixed prosthesis: A dental technique.
   J Prosthet Dent. 2025;134:930-935.
   PubMed     Abstract available
   
   
   
9. JIA S, Wang G, Zhao Y, Wang X, et al
   Autonomous robotic system for the assisted immediate placement of a maxillary anterior implant: A clinical report.
   J Prosthet Dent. 2025;134:884-889.
   PubMed     Abstract available
   
   
   
10. RODEJA-VAZQUEZ M, Torres-Rodriguez JC, Costa-Palau S, Nart J, et al
    A combination crown lengthening and implant placement guide.
    J Prosthet Dent. 2025;134:952-956.
    PubMed     Abstract available
    
    
    
11. BOGNER MS, Chambas V, Veyrune JL, Faulks D, et al
    Oral implant rehabilitation under general anesthesia for patients with cognitive and physical disabilities: A 14-year cohort study.
    J Prosthet Dent. 2025;134:1156-1163.
    PubMed     Abstract available
    
    
    
12. MITTAL S, Kaurani P, Goyal R
    Comparison of accuracy between single posterior immediate and delayed implants placed using computer guided implant surgery and a digital laser printed surgical guide: A clinical investigation.
    J Prosthet Dent. 2025;134:1133-1139.
    PubMed     Abstract available
    
    
    
13. LYU W, Zou J, Li L
    A dental technique to reseat an angled nonhexagon multiunit abutment in a complete arch fixed prosthesis.
    J Prosthet Dent. 2025;134:962-966.
    PubMed     Abstract available
    
    
    
14. HAN JW, Han JW, Pyo SW, Kim S, et al
    Impact of profile angle of CAD-CAM abutment on the marginal bone loss of implant-supported single-tooth posterior restorations.
    J Prosthet Dent. 2025;134:1180-1186.
    PubMed     Abstract available
    
    
    
15. ZHOU L, Teng W, Li X, Su Y, et al
    Accuracy of an optical robotic computer-aided implant system and the trueness of virtual techniques for measuring robot accuracy evaluated with a coordinate measuring machine in vitro.
    J Prosthet Dent. 2025;134:1189-1195.
    PubMed     Abstract available
    
    
    
16. ALQUTAIBI AY, Hamadallah HH, Abu Zaid B, Aloufi AM, et al
    Applications of robots in implant dentistry: A scoping review.
    J Prosthet Dent. 2025;134:1052-1061.
    PubMed     Abstract available
    
    
    
17. WANG W, Yu X, Wang F, Wu Y, et al
    Clinical efficacy of computer-assisted zygomatic implant surgery: A systematic scoping review.
    J Prosthet Dent. 2025;134:1062-1074.
    PubMed     Abstract available
    
    
    September 2025
18. FANG Q, Rezania R, Rafaty A, Elfaki T, et al
    Exploring the role of Instagram Reels in predoctoral dental implant education, a randomized crossover study.
    J Prosthet Dent. 2025 Sep 24:S0022-3913(25)00738.
    PubMed     Abstract available
    
    
    
19. KHAOHOEN A, Powcharoen W, Yoda N, Rungsiyakull C, et al
    Response to Letter to the Editor regarding, "Accuracy in dental implant placement: A systematic review and meta-analysis comparing computer-assisted (static, dynamic, robotics) and noncomputer-assisted (freehand, conventional guide) approaches".
    J Prosthet Dent. 2025 Sep 12:S0022-3913(25)00682.
    PubMed    
    
    
    
20. HESS DP, Wadhwani CP, Chung KH, Wee AG, et al
    A practical approach to determining screw preload in dental implant systems.
    J Prosthet Dent. 2025 Sep 9:S0022-3913(25)00673.
    PubMed     Abstract available
    
    
    
21. LI Y, Wang X, Zhu H, Ye W, et al
    The diagnostic performance of AI based on dental radiographs in predicting marginal bone loss around dental implants: A systematic review and meta-analysis.
    J Prosthet Dent. 2025 Sep 2:S0022-3913(25)00665.
    PubMed     Abstract available
    
    
    
22. DE ANGELIS P, Liguori MG, Rella E, Staffieri A, et al
    Influence of the interimplant horizontal distance on the clinical outcomes of patients rehabilitated with two adjacent implants: A systematic review and meta-analysis.
    J Prosthet Dent. 2025;134:631.
    PubMed     Abstract available
    
    
    
23. SUN M, Oh KC, Kim J, Moon HS, et al
    Three-dimensional evaluation of the internal and marginal fit of multiunit implant-supported anterior fixed dental prostheses fabricated using different intraoral scanning protocols: An in vitro study.
    J Prosthet Dent. 2025;134:764.
    PubMed     Abstract available
    
    
    
24. QIU P, Cao R, Dai J, Zhou S, et al
    Influence of abutment types on the success of two-unit implant-supported fixed dental prostheses: A three-dimensional finite element analysis and fatigue test combined with microleakage evaluation.
    J Prosthet Dent. 2025;134:763.
    PubMed     Abstract available
    
    
    
25. FANG Q, Ramachandran RA, Koseoglu M, Kan J, et al
    Socket shield technique in implant dentistry: An AI-based bibliometric analysis.
    J Prosthet Dent. 2025;134:632-642.
    PubMed     Abstract available
    
    
    
26. SINSAREEKUL C, Limpuangthip N
    Potential risks, treatment strategies, and treatment outcomes of retrograde peri-implantitis: A systematic review.
    J Prosthet Dent. 2025;134:651.
    PubMed     Abstract available
    
    
    
27. HAMILTON A, Akhondi S, Pala K, Luz D, et al
    Using postoperative CBCT to enhance preoperative planning integration in complete arch implant rehabilitation.
    J Prosthet Dent. 2025;134:580-585.
    PubMed     Abstract available
    
    
    
28. SARI O, Sakarya RE, Gundogdu M
    Mechanical behavior of subtractively and additively manufactured zirconia and polyetheretherketone implant abutments after thermomechanical aging.
    J Prosthet Dent. 2025;134:762.
    PubMed     Abstract available
    
    
    
29. VELOSO DV, Barbin T, Del Rio Silva L, Barao VAR, et al
    Additive manufacturing of CAD-CAM complete arch fixed implant restorations supported by six implants: Prosthetic screw stability and marginal precision under masticatory simulation.
    J Prosthet Dent. 2025;134:783.
    PubMed     Abstract available
    
    
    
30. PROTT LS, Atria PJ, Maluf CV, Blatz MB, et al
    In vitro comparison between complete arch abutment-level implant impressions with photogrammetry, grammetry, and intraoral scanning.
    J Prosthet Dent. 2025;134:782.
    PubMed     Abstract available
    
    
    
31. MURAT S, Batak B, Kamburoglu K, Gurbuz A, et al
    Trueness of digital implant scans in patients with maxillary defects: An in vitro study.
    J Prosthet Dent. 2025;134:865.
    PubMed     Abstract available
    
    
    
32. ARCURI L, Pozzi A, Londono J, Nardi A, et al
    Complete arch digital implant scan accuracy with screw-retained or snap-on scan bodies: A comparative in vitro study.
    J Prosthet Dent. 2025;134:774-781.
    PubMed     Abstract available
    
    
    
33. GOMEZ-POLO M, Cascos R, Ortega R, Barmak AB, et al
    Complete arch implant scans with standard scan bodies versus scannable healing abutments on scanning accuracy, scanning time, and number of photograms: A comparative clinical study.
    J Prosthet Dent. 2025;134:694-703.
    PubMed     Abstract available
    
    
    
34. LI P, Chen K, Chen J, Xu S, et al
    Digital workflow for complete arch immediate loading with a prefabricated interim prosthesis using autonomous robotic surgery: A dental technique.
    J Prosthet Dent. 2025;134:573-579.
    PubMed     Abstract available
    
    
    
35. REVILLA-LEON M, Barmak AB, Lanis A, Kois JC, et al
    Influence of connected and nonconnected calibrated frameworks on the accuracy of complete arch implant scans obtained by using four intraoral scanners, a desktop scanner, and a photogrammetry system.
    J Prosthet Dent. 2025;134:800-808.
    PubMed     Abstract available
    
    
    
36. DAHER T, Morgano S
    CAD-CAM fabrication of semiprecision LOCATOR-style abutments to correct severely misaligned implants supporting a 4-implant maxillary overdenture.
    J Prosthet Dent. 2025;134:557-561.
    PubMed     Abstract available
    
    
    
37. JEONG M, Kwon DH, Lee SJ
    Computer guided root tip extraction and implant placement: A clinical report.
    J Prosthet Dent. 2025;134:531-534.
    PubMed     Abstract available
    
    
    
38. ABDELREHIM A, Sulaiman E, Sofian H, Salleh NM, et al
    Effect of geometric heterogeneity using an auxiliary device on the accuracy of complete arch implant scanning: An in vitro study of different clinical simulations.
    J Prosthet Dent. 2025;134:765-773.
    PubMed     Abstract available
    
    
    
39. ZHANG Y, Tao B, Wang F, Wu Y, et al
    Integrating a mouth opening assessment of virtual patients to prevent intraoperative challenges during treatment.
    J Prosthet Dent. 2025;134:562-567.
    PubMed     Abstract available
    
    
    
40. ELLAKANY P, Aly NM, Hassan MG
    #implantology: A content analysis of the implant-related hashtags on Instagram.
    J Prosthet Dent. 2025;134:784-790.
    PubMed     Abstract available
    
    
    August 2025
41. MEHTA V, Mathur A, Bhadania M, Patil PG, et al
    Accuracy assessment of robot-assisted dental implant surgery: An umbrella review of systematic reviews.
    J Prosthet Dent. 2025 Aug 12:S0022-3913(25)00558.
    PubMed     Abstract available
    
    
    
42. JAR C, Archibald A, Gibson M, Westover L, et al
    Development and evaluation of a noninvasive vibration modeling technique for primary stability measurement in artificial cortical bone blocks.
    J Prosthet Dent. 2025;134:433.
    PubMed     Abstract available
    
    
    
43. GOMEZ-PRIETO E, Del Rio Highsmith J, Gomez-Polo M
    Influence of implant internal thread deformation and repair on screw torque maintenance: An in vitro study.
    J Prosthet Dent. 2025;134:434.
    PubMed     Abstract available
    
    
    
44. KROMMYDAS K, Papaioannou E, Karagiannidou C, Kirmanidou Y, et al
    Role of interproximal contacts in implant-supported crown stability: A finite element analysis study.
    J Prosthet Dent. 2025;134:436.
    PubMed     Abstract available
    
    
    
45. JIAN S, Yang S, Liang S, Xiaoli Z, et al
    Development of a peri-implantitis model in New Zealand white rabbits: A preclinical study.
    J Prosthet Dent. 2025;134:437.
    PubMed     Abstract available
    
    
    
46. ALRUHAILIE L, Khayat M, Bamashmous A, Raffa O, et al
    Using virtual implant alignment to fabricate a combined implant-supported interim restoration and surgical guide: A dental technique.
    J Prosthet Dent. 2025;134:340-345.
    PubMed     Abstract available
    
    
    
47. GIOVANELLA F
    Graftless complete arch rehabilitation using a facial approach for enhanced bone anchorage and prosthetic outcomes: A clinical report.
    J Prosthet Dent. 2025;134:295.
    PubMed     Abstract available
    
    
    
48. LIM NK, Jeong HC, Huh JW, Kim C, et al
    Three strategies of implant placement as an abutment for combined tooth-implant-supported double crown removable partial dentures: A clinical report of three patients up to 18 years.
    J Prosthet Dent. 2025;134:296.
    PubMed     Abstract available
    
    
    
49. RAMADAN RE, Razek MKA, Mohamed FS, Abd-Ellah ME, et al
    Fully digital workflow for a CAD-CAM custom healing abutment with an optimal emergence profile: A dental technique.
    J Prosthet Dent. 2025;134:325.
    PubMed     Abstract available
    
    
    
50. TANG W, Zheng C, Li L
    Enhancing the gingival contour of an anterior implant restoration by using a guided bone regeneration abutment.
    J Prosthet Dent. 2025;134:297.
    PubMed     Abstract available
    
    
    
51. ABDELAZIZ MS, Ayad MW, Tella EAESAEM
    Fabrication of a reverse-engineered custom scan body as a digital solution for recording implant position: A dental technique.
    J Prosthet Dent. 2025;134:335-339.
    PubMed     Abstract available
    
    
    July 2025
52. LI X, Wang G, Zhao Y, Wang X, et al
    Accuracy of autonomous dental implant robotic system versus static guide-assisted implant surgery in immediate implant placement: A retrospective clinical study.
    J Prosthet Dent. 2025 Jul 29:S0022-3913(25)00564.
    PubMed     Abstract available
    
    
    
53. YAU HT, Shen GY, Vu-Dinh H
    A computational approach to automated dental implant placement: Bone density optimization around the implant with the Levenberg-Marquardt algorithm.
    J Prosthet Dent. 2025 Jul 12:S0022-3913(25)00554.
    PubMed     Abstract available
    
    
    
54. LIN CY, Lin CH, Chang CT, Liao YF, et al
    Associated variables of peri-implant bone resorption for dental implants placed in the fibular reconstructed maxilla and mandible of patients with oral cancer: A retrospective clinical study.
    J Prosthet Dent. 2025 Jul 11:S0022-3913(25)00540.
    PubMed     Abstract available
    
    
    
55. HE P, Duan S, Li L, Wu Y, et al
    A socket shield technique: Preparation of the shield under oral microscopy.
    J Prosthet Dent. 2025;134:28-32.
    PubMed     Abstract available
    
    
    
56. LI Y, Zhou Y, Lyu J, Cao X, et al
    Accuracy of bi-coordinate and multi-coordinate handpiece calibration methods for robot-assisted implant placement.
    J Prosthet Dent. 2025;134:188.
    PubMed     Abstract available
    
    
    
57. ABDELREHIM A, Bin Sulaiman E, Sofian H, Salleh NM, et al
    Time efficiency and precision of splinted complete arch implant scanning.
    J Prosthet Dent. 2025;134:223.
    PubMed     Abstract available
    
    
    
58. ZHANG JP, Wang ZH, Zhang J, Qiu J, et al
    Convolutional neural network-based measurement of crown-implant ratio for implant-supported prostheses.
    J Prosthet Dent. 2025;134:189.
    PubMed     Abstract available
    
    
    
59. TALMAZOV G, Young J, Thomas D, Michaud PL, et al
    A technique to guide implant placement with the long axis parallel to the path of insertion of removable partial dentures.
    J Prosthet Dent. 2025;134:38-41.
    PubMed     Abstract available
    
    
    
60. TOMAR S, Saxena D, Kaur N
    Marginal bone loss around implants with platform switching and platform matched connection: A systematic review.
    J Prosthet Dent. 2025;134:109-113.
    PubMed     Abstract available
    
    
    
61. KHER U, Nimbalkar S, Patil PG, Mehta N, et al
    Esthetic rehabilitation of mutilated maxillary anterior alveolar segment by combining orthodontic osseous distraction and implant-supported crowns: A clinical report.
    J Prosthet Dent. 2025;134:5-10.
    PubMed     Abstract available
    
    
    
62. REIS INRD, Fukuoka GL, Nagay BE, Pannuti CM, et al
    Incidence of peri-implant disease associated with cement- and screw-retained implant-supported prostheses: A systematic review and meta-analysis.
    J Prosthet Dent. 2025;134:100-108.
    PubMed     Abstract available
    
    
    
63. SALAZAR RIOS AL, Kesterke MJ, Pylant GD 3rd, Barmak AB, et al
    Effect of print orientation, storage conditions, and storage time on intaglio surface accuracy of implant surgical guides fabricated by using a stereolithography technology.
    J Prosthet Dent. 2025;134:179-186.
    PubMed     Abstract available
    
    
    
64. REZAEI A, Gholami P
    Three-dimensional guided lateral window sinus lift and simultaneous implant placement: A dental technique.
    J Prosthet Dent. 2025;134:33-37.
    PubMed     Abstract available
    
    
    June 2025
65. REVILLA-LEON M, Cascos R, Lawand G, Barmak AB, et al
    Accuracy of complete arch nonsplinting and noncalibrated splinting implant scanning techniques recorded by using five intraoral scanners.
    J Prosthet Dent. 2025;133:1581.
    PubMed     Abstract available
    
    
    
66. ASSORATGOON I, Wan B, Tenkumo T, Sato T, et al
    Three-dimensional in vivo and finite element analyses of peri-implant bone remodeling after superstructure placement.
    J Prosthet Dent. 2025;133:1535-1544.
    PubMed     Abstract available
    
    
    
67. KALRA J, Dhawan P, Jain N
    Implant stability and crestal bone level in osseodensification and conventional drilling protocols: A systematic review and meta-analysis.
    J Prosthet Dent. 2025;133:1462.
    PubMed     Abstract available
    
    
    
68. MORASCHINI V, de Almeida DCF, Louro RS, de Oliveira Silva AM, et al
    Accuracy of artificial intelligence in implant dentistry: A scoping review with systematic evidence mapping.
    J Prosthet Dent. 2025;133:1461.
    PubMed     Abstract available
    
    
    
69. KHORSHED KAA, Elgamal M, Haggag MA, ELsyad MA, et al
    Closed sinus lift and fixed prostheses versus implant-assisted overdentures in management of atrophied distal extension maxillary ridges: A one-year randomized clinical trial.
    J Prosthet Dent. 2025;133:1503.
    PubMed     Abstract available
    
    
    
70. DE ALMEIDA JC, Soares MQS, Mamani MP, Franco A, et al
    Influence of surgeon experience on implant placement in guided surgeries: A systematic review and meta-analysis of randomized clinical trials.
    J Prosthet Dent. 2025;133:1463.
    PubMed     Abstract available
    
    
    
71. SUN JS, Liu KC, Hung MC, Lin HY, et al
    A cross-sectional study for prevalence and risk factors of peri-implant marginal bone loss.
    J Prosthet Dent. 2025;133:1504.
    PubMed     Abstract available
    
    
    
72. DENG H, Wang J, Liu L, Li Y, et al
    Feasibility and accuracy of a task-autonomous robot for zygomatic implant placement.
    J Prosthet Dent. 2025;133:1553.
    PubMed     Abstract available
    
    
    
73. BOHNER L, Dirksen D, Hanisch M, Sesma N, et al
    Artifacts in magnetic resonance imaging of the head and neck: Unwanted effects caused by implant-supported restorations fabricated with different alloys.
    J Prosthet Dent. 2025;133:1574-1579.
    PubMed     Abstract available
    
    
    
74. BOUZID L, Lescaille G, Pomes B, Friedlander L, et al
    Implant retained prosthesis on a free fibula flap: A challenging procedure for prosthetic and soft tissue management.
    J Prosthet Dent. 2025;133:1598-1603.
    PubMed     Abstract available
    
    
    
75. JOHN A, Sherigar P, Hegde V, George VT, et al
    Prosthodontic rehabilitation of a patient with nintedanib-induced osteonecrosis of the jaw: A clinical report.
    J Prosthet Dent. 2025;133:1592-1597.
    PubMed     Abstract available
    
    
    May 2025
76. CHEN J
    Insights into "Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images: A systematic review and meta-analysis".
    J Prosthet Dent. 2025 May 30:S0022-3913(25)00415.
    PubMed    
    
    
    
77. DASHTI M, Londono J, Ghasemi S, Tabatabaei S, et al
    Response to Letter to the Editor regarding "Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images: A systematic review and meta-analysis".
    J Prosthet Dent. 2025 May 30:S0022-3913(25)00414.
    PubMed    
    
    
    
78. ANITUA E, Tejero R, Armentia M, Fernandez-de-Gobeo I, et al
    Detection of the initial gap at different implant-abutment connections.
    J Prosthet Dent. 2025;133:1325.
    PubMed     Abstract available
    
    
    
79. AKTAS A, Manav TY, Zortuk M
    Effect of reusing impression posts and scan bodies on recording accuracy.
    J Prosthet Dent. 2025;133:1324.
    PubMed     Abstract available
    
    
    
80. ESTIBALEZ-RECASENS M, Serrano-Granger C, Santamaria-Laorden A, Andreu-Vazquez C, et al
    Precision of stereophotogrammetry in complete arch implant recordings: A clinical study.
    J Prosthet Dent. 2025;133:1242-1249.
    PubMed     Abstract available
    
    
    
81. SIU G, Sheets JL, Sukotjo C, Wee AG, et al
    Validity and reliability of a proposed anterior implant esthetic index (AIEI).
    J Prosthet Dent. 2025;133:1294-1303.
    PubMed     Abstract available
    
    
    
82. YANG F, Chen J, Wang L, Ding Y, et al
    Accuracy and safety of implant placement with a novel semi-autonomous robotic-assisted surgical system: A translational research study.
    J Prosthet Dent. 2025;133:1304-1314.
    PubMed     Abstract available
    
    
    
83. COSTA RC, Borges GA, Dini C, Bertolini M, et al
    Clinical efficacy of triclosan-containing toothpaste in peri-implant health: A systematic review and meta-analysis of randomized clinical trials.
    J Prosthet Dent. 2025;133:1183-1193.
    PubMed     Abstract available
    
    
    
84. PIGOZZO MN, Cunha N, Amorim K, Lagana DC, et al
    Cumulative success rate and marginal bone loss for immediate and early loading protocols in a single implant-supported crown: A randomized controlled split-mouth clinical trial.
    J Prosthet Dent. 2025;133:1229-1234.
    PubMed     Abstract available
    
    
    
85. DENG H, Bian H, Li C, Li Y, et al
    Autonomous dental robotic surgery for zygomatic implants: A two-stage technique.
    J Prosthet Dent. 2025;133:1132-1138.
    PubMed     Abstract available
    
    
    
86. JU C, Lee Y, Hong SJ, Song SJ, et al
    Risk factors associated with screw loosening in CAD-CAM custom abutments: A 6-year retrospective study.
    J Prosthet Dent. 2025;133:1235-1241.
    PubMed     Abstract available
    
    
    
87. LAO CM, Chen H, Ji C, Lao SH, et al
    Minimally invasive management of a socket shield technique complication: A clinical report.
    J Prosthet Dent. 2025;133:1127-1131.
    PubMed     Abstract available
    
    
    April 2025
88. GADALLAH MA, Omaish HHM, Shenoda AM
    Fully guided dental implant placement by using an additively manufactured screw-retained surgical guide: A dental technique.
    J Prosthet Dent. 2025 Apr 15:S0022-3913(25)00288.
    PubMed     Abstract available
    
    
    
89. KHAOHOEN A, Powcharoen W, Yoda N, Rungsiyakull C, et al
    Accuracy in dental implant placement: A systematic review and meta-analysis comparing computer-assisted (static, dynamic, robotics) and noncomputer-assisted (freehand, conventional guide) approaches.
    J Prosthet Dent. 2025 Apr 10:S0022-3913(25)00285.
    PubMed     Abstract available
    
    
    
90. WADHWANI CP, Chung KH
    A straightforward method to record the peak torque value when using a cantilever spring mechanical torque limiting device.
    J Prosthet Dent. 2025;133:1109-1111.
    PubMed     Abstract available
    
    
    
91. LU Q, Zhu Y, Chen Y, Xu P, et al
    Accuracy of a 3D printed custom resin crossbar for complete arch implant scanning: An in vitro and in vivo study.
    J Prosthet Dent. 2025;133:1078.
    PubMed     Abstract available
    
    
    
92. RIBEIRO MCO, Vargas-Moreno VF, Gomes RS, Bergamo ETP, et al
    Reliability, failure mode, and stress distribution in conical connections with different types of retention.
    J Prosthet Dent. 2025;133:1079.
    PubMed     Abstract available
    
    
    
93. THAPA D, Shrestha P, Bhochhibhoya A, Sharma R, et al
    Retrieval of a displaced implant from the mandibular body: A clinical report.
    J Prosthet Dent. 2025;133:959-963.
    PubMed     Abstract available
    
    
    
94. HYSPLER P, Strnad J, Sala R, Dostalova T, et al
    Reverse scan technique: A verification method for the implant position in intraoral scans.
    J Prosthet Dent. 2025;133:968-971.
    PubMed     Abstract available
    
    
    
95. BERNAL G, Ruiz L, Aellos F, Salazar C, et al
    Clinical and cone beam computed tomography outcomes of maxillary anterior implant restorations after immediate implant placement with interim restorations: A 1- to 14-year retrospective analysis.
    J Prosthet Dent. 2025;133:1025-1032.
    PubMed     Abstract available
    
    
    
96. WANG W, Li X, Mei D, Zhao B, et al
    Autogenous solid dentin for horizontal ridge augmentation with simultaneous implantation in a severe bone defect: A 3.5-year follow-up clinical report.
    J Prosthet Dent. 2025;133:948-953.
    PubMed     Abstract available
    
    
    
97. POTDUKHE SS, Iyer JM, Nadgere JB
    Evaluation of implant stability and increase in bone height in indirect sinus lift done with the osseodensification and osteotome technique: A systematic review and meta-analysis.
    J Prosthet Dent. 2025;133:982-989.
    PubMed     Abstract available
    
    
    
98. BEKHIT SS, Abdelhamid AM, Metwally NA
    Evaluation of prosthetic screw loosening in all-on-four implant-supported restorations with two different connection systems.
    J Prosthet Dent. 2025;133:1070-1077.
    PubMed     Abstract available
    
    
    
99. CALAZANS NETO JV, Valente MLDC, Reis ACD
    Effect of pores on cell adhesion to additively manufactured titanium implants: A systematic review.
    J Prosthet Dent. 2025;133:990-997.
    PubMed     Abstract available
    
    
    March 2025
100. KWON S, Park EJ
     Scanning accuracy of abutment level scan body according to insertion angles and depths of dental implants.
     J Prosthet Dent. 2025 Mar 27:S0022-3913(25)00110.
     PubMed     Abstract available
     
     
     
101. ABU RUJA M, Shokati B, Mendes VC, Azarpazhooh A, et al
     Retrospective analysis of dental implant fracture following loading: A retrospective clinical study.
     J Prosthet Dent. 2025 Mar 25:S0022-3913(25)00192.
     PubMed     Abstract available
     
     
     
102. LIANG C, Wang Y, Li J, Geng W, et al
     Evaluation of the effects of the small intestine submucosa biological membrane on guided bone regeneration and early loading of dental implants in the maxillary anterior region: A randomized controlled trial.
     J Prosthet Dent. 2025 Mar 18:S0022-3913(25)00180.
     PubMed     Abstract available
     
     
     
103. HAHN S, Ramos V Jr, An J, Wadhwani CPK, et al
     Assessment of the internal connection of an angled screw channel system.
     J Prosthet Dent. 2025;133:844.
     PubMed     Abstract available
     
     
     
104. COBO-VAZQUEZ CM, Molinero-Mourelle P, Romeo-Rubio M, Guisado-Moya BF, et al
     Prospective clinical-radiological study of the survival and behavior of short implants.
     J Prosthet Dent. 2025;133:796-804.
     PubMed     Abstract available
     
     
     
105. QIAN X, Vankos B, Kelemen K, Gede N, et al
     Comparison of implant placement and loading protocols for single anterior maxillary implants: A systematic review and network meta-analysis.
     J Prosthet Dent. 2025;133:677-688.
     PubMed     Abstract available
     
     
     
106. PARK JW, Goodacre CJ, Kan JYK, Lozada J, et al
     Proposal regarding horizontal and vertical positioning of single implants placed in healed sites: Effect on cervical crown form and the need for bone grafting.
     J Prosthet Dent. 2025;133:827-837.
     PubMed     Abstract available
     
     
     
107. TRONCOSO-PAZOS J, Matamala P, Jusari MF, Risco K, et al
     Position of digitally guided implants in completely edentulous maxillae by using a modified double-scan and overlap of three digital surface protocol.
     J Prosthet Dent. 2025;133:780-789.
     PubMed     Abstract available
     
     
     
108. NUYTENS P, Li J, Lepidi L
     Face oriented digital workflow for transferring intraoral and extraoral data of edentulous arch rehabilitated with multiple implants: A clinical technique.
     J Prosthet Dent. 2025;133:655-661.
     PubMed     Abstract available
     
     
     February 2025
109. DASHTI M, Londono J, Ghasemi S, Tabatabaei S, et al
     Response to Letter to the Editor regarding, "Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images: A systematic review and meta-analysis".
     J Prosthet Dent. 2025 Feb 10:S0022-3913(25)00050.
     PubMed    
     
     
     
110. SULTAN S
     Letter to the Editor regarding, "Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images: A systematic review and meta-analysis" by Dashti et al.
     J Prosthet Dent. 2025 Feb 8:S0022-3913(25)00049.
     PubMed    
     
     
     
111. BAI Y, Wang S, Zheng J, Song S, et al
     Exploring the impact of blood and bone debris at the implant-abutment interface on peak removal torque: Bridging clinical observations with laboratory evidence.
     J Prosthet Dent. 2025;133:540.
     PubMed     Abstract available
     
     
     
112. WU J, Shui Y, Xie C, Wu Q, et al
     Effect of fabrication methods and number of supporting teeth on the surface accuracy and dimensional stability of implant surgical guides.
     J Prosthet Dent. 2025;133:530.
     PubMed     Abstract available
     
     
     
113. GUO J, Wang X, Liu Z, Zhou J, et al
     Acoustic resonance frequency analysis for evaluating prosthetic screw stability in splinted implant-supported fixed dental prostheses: An in vitro study.
     J Prosthet Dent. 2025;133:542.
     PubMed     Abstract available
     
     
     
114. PASCOAL ALB, Paiva KRG, Marinho LCN, Bezerra ADS, et al
     Impact of splinting implant-supported crowns on the performance of adjacent posterior implants: A systematic review and meta-analysis.
     J Prosthet Dent. 2025;133:402-410.
     PubMed     Abstract available
     
     
     
115. OCHOA-LOPEZ G, Revilla-Leon M, Gomez-Polo M
     Influence of the ambient color lighting on the accuracy of complete arch implant scans recorded by using two intraoral scanners.
     J Prosthet Dent. 2025;133:552-559.
     PubMed     Abstract available
     
     
     
116. CHEN R, Xu J, Wang S, Duan S, et al
     Effectiveness of immediate implant placement into defective sockets in the esthetic zone: A systematic review and meta-analysis.
     J Prosthet Dent. 2025;133:411-426.
     PubMed     Abstract available
     
     
     
117. ETXANIZ O, Amezua X, Jauregi M, Solaberrieta E, et al
     Obtaining more accurate complete arch implant digital scans with the aid of a geometric pattern: A dental technique.
     J Prosthet Dent. 2025;133:370-375.
     PubMed     Abstract available
     
     
     
118. PAWLAK A, Chee WW, Park CJ
     Use of polyvinyl siloxane to maintain peri-implant submucosal contours on removal of screw-retained implant-supported restorations.
     J Prosthet Dent. 2025;133:367-369.
     PubMed     Abstract available
     
     
     
119. BATHIJA A, Papaspyridakos P, Finkelman M, Kim Y, et al
     Accuracy of static computer-aided implant surgery (S-CAIS) using CAD-CAM surgical templates fabricated from different additive manufacturing technologies.
     J Prosthet Dent. 2025;133:524-529.
     PubMed     Abstract available
     
     
     
120. EL-DANASORY MB, Khamis MM, Abdel Hakim AA, Fahmy RA, et al
     Outcomes of bio-esthetic single implant-supported restorations after peri-implant soft tissue conditioning with two prosthetic techniques: A 1-year randomized clinical trial.
     J Prosthet Dent. 2025;133:472-480.
     PubMed     Abstract available
     
     
     January 2025
121. TAYMOUR N, Fouda SM, Abdelrahaman HH, Hassan MG, et al
     Performance of the ChatGPT-3.5, ChatGPT-4, and Google Gemini large language models in responding to dental implantology inquiries.
     J Prosthet Dent. 2025 Jan 4:S0022-3913(24)00833.
     PubMed     Abstract available
     
     
     
122. KIM D, Kim K, Ohe JY, Song SJ, et al
     Correlation between implant angulation and crestal bone changes: A 5-year retrospective study.
     J Prosthet Dent. 2025;133:162.
     PubMed     Abstract available
     
     
     
123. ROTENBERG D, Mayer Y, Horwitz J, Nov Y, et al
     A multifunctional scannable mounting device for computer guided implant surgery: An in vitro study.
     J Prosthet Dent. 2025;133:221.
     PubMed     Abstract available
     
     
     
124. GOLALIPOUR S, Jalalian E, Koosha S, Khorshidi S, et al
     In vitro effect of anodization on surface roughness and bacterial adhesion to titanium abutments.
     J Prosthet Dent. 2025;133:291.
     PubMed     Abstract available
     
     
     
125. ETXANIZ O, Amezua X, Jauregi M, Solaberrieta E, et al
     Improving the accuracy of complete arch implant digital scans by using auxiliary clips for intraoral scan bodies: A dental technique.
     J Prosthet Dent. 2025;133:43-47.
     PubMed     Abstract available
     
     
     
126. RUTKUNAS V, Kules D, Mischitz I, Huber S, et al
     Misfit simulation on implant-supported prostheses with different combinations of engaging and nonengaging titanium bases: Part 3: A radiographic evaluation.
     J Prosthet Dent. 2025;133:222-228.
     PubMed     Abstract available
     
     
     
127. ETXANIZ O, Amezua X, Jauregi M, Solaberrieta E, et al
     Improving the accuracy of complete arch implant intraoral digital scans by using horizontal scan bodies with occlusal geometry: A dental technique.
     J Prosthet Dent. 2025;133:57-61.
     PubMed     Abstract available
     
     
     
128. REVILLA-LEON M, Gomez-Polo M, Drone M, Barmak AB, et al
     Influence of implant reference on the scanning accuracy of complete arch implant scans captured by using a photogrammetry system.
     J Prosthet Dent. 2025;133:252-257.
     PubMed     Abstract available
     
     
     
129. CROCKETT RJ, Parikh V, Ahn B, Yao CHD, et al
     Use of a dual-purpose implant scan body to obtain both digital and analog records for complete arch fixed implant restorations.
     J Prosthet Dent. 2025;133:36-42.
     PubMed     Abstract available
     
     
     
130. JEONG CW, Kim H, Kim OS
     Esthetic reconstruction of a localized severely resorbed anterior maxilla associated with peri-implantitis: A clinical report.
     J Prosthet Dent. 2025;133:8-13.
     PubMed     Abstract available
     
     
     
131. KREVE S, Oliveira VC, Santos ES, Oliveira TT, et al
     In situ evaluation of microbial profile formed on Ti-6Al-4V additive manufacturing disks: 16S rRNA sequencing.
     J Prosthet Dent. 2025;133:283-290.
     PubMed     Abstract available
     
     
     
132. ZHANG WT, Ding YD, Wang LH, Yang F, et al
     Retrieval of a fractured implant abutment using a modified cover screw removal instrument: A clinical report.
     J Prosthet Dent. 2025;133:14-17.
     PubMed     Abstract available
     
     
     
133. LATIF KHALIFA AA, Metwally NA, Khamis MM
     Evaluation of debonding force of screw-retained lithium disilicate implant-supported crowns cemented to abutments of different designs and surface treatments.
     J Prosthet Dent. 2025;133:215-220.
     PubMed     Abstract available
     
     
     December 2024
134. WILSON C, Taxel P, Shafer D, Tadinada A, et al
     Cone beam computed tomography outcomes in patients diagnosed with compromised bone health undergoing dental implant therapy and bone augmentation.
     J Prosthet Dent. 2024 Dec 6:S0022-3913(24)00724.
     PubMed     Abstract available
     
     
     
135. DE FREITAS JR, Valente MLDC, Brazao EH, Moris ICM, et al
     Evaluation of axial displacement and torque loss of Morse-type prosthetic abutments of different angular tapers to their respective implants.
     J Prosthet Dent. 2024;132:1311.
     PubMed     Abstract available
     
     
     
136. LI Y, Lyu J, Cao X, Zhou Y, et al
     Accuracy of a calibration method based on cone beam computed tomography and intraoral scanner data registration for robot-assisted implant placement: An in vitro study.
     J Prosthet Dent. 2024;132:1309.
     PubMed     Abstract available
     
     
     
137. LIAROPOULOU GM, Kamposiora P, Quilez JB, Canto-Naves O, et al
     Reverse impression technique: A fully digital protocol for the fabrication of the definitive fixed prosthesis for completely edentulous patients.
     J Prosthet Dent. 2024;132:1118-1122.
     PubMed     Abstract available
     
     
     
138. SADOWSKY SJ
     Peri-implantitis after 40 years: Evidence, mechanisms, and implications: A mapping review.
     J Prosthet Dent. 2024;132:1215-1225.
     PubMed     Abstract available
     
     
     
139. SCHOENBAUM TR, Papaspyridakos P, Kim YK, Arce C, et al
     Clinician preferences for single-unit implant restoration designs and materials: A survey of the membership of the Pacific Coast Society for Prosthodontics.
     J Prosthet Dent. 2024;132:1288-1298.
     PubMed     Abstract available
     
     
     
140. KADKHODAZADEH M, Amid R, Moscowchi A, Lakmazaheri E, et al
     Short-term and long-term success and survival rates of implants supporting single-unit and multiunit fixed prostheses: A systematic review and meta-analysis.
     J Prosthet Dent. 2024;132:1226-1236.
     PubMed     Abstract available
     
     
     
141. DEEPIKA K, Bhatnagar A, Singh A, Soni R, et al
     Evaluation of active tactile sensibility in a single-tooth implant opposing a natural tooth with either an immediate or delayed functional loading protocol: A parallel design clinical study.
     J Prosthet Dent. 2024;132:1270-1276.
     PubMed     Abstract available
     
     
     
142. ZHANG R, Hao X, Zhang K
     Evaluation of two different occlusal patterns on single posterior implant-supported crowns: A 12-month prospective study of occlusal analysis.
     J Prosthet Dent. 2024;132:1277-1284.
     PubMed     Abstract available
     
     
     
143. WU Q, Wu J, Tan Y, Sun J, et al
     A chairside digital radiographic guide for registering digital casts to cone beam computed tomography scans with strong metallic artifacts.
     J Prosthet Dent. 2024;132:1104-1111.
     PubMed     Abstract available
     
     
     November 2024
144. ALQUTAIBI AY, Algabri RS, Alamri AS, Alhazmi LS, et al
     Advancements of artificial intelligence algorithms in predicting dental implant prognosis from radiographic images: A systematic review.
     J Prosthet Dent. 2024 Nov 27:S0022-3913(24)00727.
     PubMed     Abstract available
     
     
     
145. PARK G, Meirelles L, Gouveia D, Lee D, et al
     Accuracy of dental implant placement with CAD-CAM 3D printed and conventional thermoplastic surgical pilot guides: A clinical comparative trial.
     J Prosthet Dent. 2024 Nov 25:S0022-3913(24)00715.
     PubMed     Abstract available
     
     
     
146. ZHAO W, Teng W, Su Y, Zhou L, et al
     Accuracy of dental implant surgery with freehand, static computer-aided, dynamic computer-aided, and robotic computer-aided implant systems: An in vitro study.
     J Prosthet Dent. 2024 Nov 18:S0022-3913(24)00702.
     PubMed     Abstract available
     
     
     
147. WADHWANI CPK, Rosen PS, Wilson TG Jr, Chung KH, et al
     A method for decontaminating a dental implant and components after abutment screw loosening: A clinical report.
     J Prosthet Dent. 2024 Nov 4:S0022-3913(24)00694.
     PubMed     Abstract available
     
     
     
148. LI Y, Fang H, Yan Y, Geng W, et al
     Accuracy of intraoral scanning using modified scan bodies for complete arch implant-supported fixed prostheses.
     J Prosthet Dent. 2024;132:994.
     PubMed     Abstract available
     
     
     
149. WAN Q, Limpuangthip N, Hlaing NHMM, Hahn S, et al
     Enhancing scanning accuracy of digital implant scans: A systematic review on application methods of scan bodies.
     J Prosthet Dent. 2024;132:898.
     PubMed     Abstract available
     
     
     
150. YEAGER B, Cakmak G, Zheng F, Johnston WM, et al
     Error analysis of stages involved in CBCT-guided implant placement with surgical guides when different printing technologies are used.
     J Prosthet Dent. 2024;132:995-1004.
     PubMed     Abstract available
     
     
     
151. BATISTA RG, Fae DS, Bento VAA, Rosa CDDRD, et al
     Impact of tilted implants for implant-supported fixed partial dentures: A systematic review with meta-analysis.
     J Prosthet Dent. 2024;132:890-897.
     PubMed     Abstract available
     
     
     
152. ZENG K, Dong Y, Li L
     Retrieval of a fractured implant abutment screw using a microtube extraction device: A dental technique.
     J Prosthet Dent. 2024;132:867-870.
     PubMed     Abstract available
     
     
     
153. ZHAI Z, Nakano T, Chen Y, Watanabe S, et al
     Abutment removal torque and implant conical surface morphological changes after standardized artificial aging: An in vitro study.
     J Prosthet Dent. 2024;132:1005-1013.
     PubMed     Abstract available
     
     
     
154. ALHOSSAINI SJ, Neena AF, Issa NO, Abouelkheir HM, et al
     Accuracy of markerless registration methods of DICOM and STL files used for computerized surgical guides in mandibles with metal restorations: An in vitro study.
     J Prosthet Dent. 2024;132:986-993.
     PubMed     Abstract available
     
     
     October 2024
155. REIS-NETA GRD, Cerqueira GFM, Ribeiro MCO, Magno MB, et al
     Is the clinical performance of dental implants influenced by different macrogeometries? A systematic review and meta-analysis.
     J Prosthet Dent. 2024 Oct 3:S0022-3913(24)00585.
     PubMed     Abstract available
     
     
     
156. LIM NK, Lim JS
     Double crown removable partial denture for a patient with ectodermal dysplasia: A clinical report after 31 years.
     J Prosthet Dent. 2024;132:658.
     PubMed     Abstract available
     
     
     
157. ALNASSER AH
     Maxillary and mandibular implant rehabilitation using a completely digital workflow: A technique.
     J Prosthet Dent. 2024;132:687.
     PubMed     Abstract available
     
     
     
158. CHI CC, Shen YW, Fuh LJ, Huang HL, et al
     Clinical evaluation of tooth angle and peripheral bone thickness considering sex and age for implant placement in the maxillary anterior region.
     J Prosthet Dent. 2024;132:783.
     PubMed     Abstract available
     
     
     
159. IBRAHIM AM, Elgamal M, Ragheb NA
     One-time definitive attachment connection versus healing abutment placement for an implant-retained mandibular overdenture: Peri-implant metabolic activity.
     J Prosthet Dent. 2024;132:782.
     PubMed     Abstract available
     
     
     
160. ALI K, Alzaid AA, Suprono MS, Garbacea A, et al
     Evaluating the effects of splinting implant scan bodies intraorally on the trueness of complete arch digital scans: A clinical study.
     J Prosthet Dent. 2024;132:781.
     PubMed     Abstract available
     
     
     
161. RAMADAN RE, Razek MKA, Mohamed FS, Fahmy RA, et al
     Single posterior implant-supported restorations fabricated using a scannable healing abutment versus a conventional scan body: A randomized controlled trial.
     J Prosthet Dent. 2024;132:755.
     PubMed     Abstract available
     
     
     
162. YANG J, Li H
     Accuracy assessment of robot-assisted implant surgery in dentistry: A systematic review and meta-analysis.
     J Prosthet Dent. 2024;132:747.
     PubMed     Abstract available
     
     
     
163. ZHANG S, Chen W, Lin Y, Chen J, et al
     A digital technique for transferring the maxillomandibular relationship for complete arch implant rehabilitation in edentulous jaws.
     J Prosthet Dent. 2024;132:688-694.
     PubMed     Abstract available
     
     
     
164. GOMEZ-POLO M, Sallorenzo A, Cascos R, Ballesteros J, et al
     Conventional and digital complete arch implant impression techniques: An in vitro study comparing accuracy.
     J Prosthet Dent. 2024;132:809-818.
     PubMed     Abstract available
     
     
     
165. LLANSANA F, Guirao S, Kois JC, Revilla-Leon M, et al
     Calibrated splinting framework for complete arch intraoral implant digital scans manufactured by combining milled and additively manufacturing technologies: A dental technique.
     J Prosthet Dent. 2024;132:680-686.
     PubMed     Abstract available
     
     
     
166. THANASRISUEBWONG P, Kulchotirat T, Hopfensperger LJ, Bencharit S, et al
     Influence of implant diameter on accuracy of static implant guided surgery: An in vitro study.
     J Prosthet Dent. 2024;132:801-808.
     PubMed     Abstract available
     
     
     
167. MACKERT J, El-Shewy M, Pannu D, Schoenbaum T, et al
     Prosthetic complications and survival rates of metal-acrylic implant fixed complete dental prostheses: A retrospective study up to 10 years.
     J Prosthet Dent. 2024;132:766-771.
     PubMed     Abstract available
     
     
     
168. DINI C, Pereira MMA, Souza JGS, de Avila ED, et al
     Mapping the trends and impact of research collaboration between countries in oral implantology publications: A bibliometric analysis from 1999 to 2019.
     J Prosthet Dent. 2024;132:735-745.
     PubMed     Abstract available
     
     
     
169. PATIL PG, Seow LL
     Correlation of implant position and crestal bone loss in 2-implant mandibular overdentures with immediate loading protocols: A prospective clinical study.
     J Prosthet Dent. 2024;132:772-779.
     PubMed     Abstract available
     
     
     September 2024
170. SALES PHDH, Diniz DA, Silva PGB, Carvalho AAT, et al
     Effectiveness of trans-sinus dental implants in the complete arch rehabilitation of the edentulous maxilla: A systematic review and meta-analysis.
     J Prosthet Dent. 2024 Sep 24:S0022-3913(24)00574.
     PubMed     Abstract available
     
     
     
171. XI S, Hu J, Yue G, Wang S, et al
     Accuracy of an autonomous dental implant robotic system in placing tilted implants for edentulous arches.
     J Prosthet Dent. 2024 Sep 19:S0022-3913(24)00521.
     PubMed     Abstract available
     
     
     
172. LIU M, Fu XJ, Lai HC, Shi JY, et al
     Accuracy of traditional open-tray impression, stereophotogrammetry, and intraoral scanning with prefabricated aids for implant-supported complete arch prostheses with different implant distributions: An in vitro study.
     J Prosthet Dent. 2024;132:602.
     PubMed     Abstract available
     
     
     
173. KONDAKJI E, Lawand G, Yaacoub W, Tohme H, et al
     Effect of different surface locking patterns on the trueness of complete arch digital implant scans: An in vitro study.
     J Prosthet Dent. 2024;132:601.
     PubMed     Abstract available
     
     
     
174. SAHIN N, Kaleli N, Ural C, Ahmadli P, et al
     Influence of toothbrushing methods on tightening torque with healing abutments of different lengths: An in vitro study.
     J Prosthet Dent. 2024;132:600.
     PubMed     Abstract available
     
     
     
175. ABDELREHIM A, Etajuri EA, Sulaiman E, Sofian H, et al
     Magnitude of misfit threshold in implant-supported restorations: A systematic review.
     J Prosthet Dent. 2024;132:528-535.
     PubMed     Abstract available
     
     
     
176. SILVA LIMA MENDES DT, Leite Matos GR, Stwart de Araujo Souza SA, Souza Silva Macedo MC, et al
     Does the incorporation of zinc into TiO(2) on titanium surfaces increase bactericidal activity? A systematic review and meta-analysis.
     J Prosthet Dent. 2024;132:510-519.
     PubMed     Abstract available
     
     
     
177. EL-SAWY MA, ELgamal ME, Ahmed WM, El-Daker MA, et al
     Polyetheretherketone subperiosteal implant retaining a maxillary fixed prosthesis: A case series.
     J Prosthet Dent. 2024;132:562-569.
     PubMed     Abstract available
     
     
     
178. WANG YS, Lee CT, Kandaswamy E, Theodorou K, et al
     Accuracy of mechanical torque-limiting devices for implant screw tightening: A systematic review and meta-analysis.
     J Prosthet Dent. 2024;132:536-545.
     PubMed     Abstract available
     
     
     
179. SHAH SD, Zheng F, Seghi RR, Lee DJ, et al
     Strength of titanium-zirconium alloy implants with a conical connection after implantoplasty.
     J Prosthet Dent. 2024;132:593-599.
     PubMed     Abstract available
     
     
     
180. PITMAN J, Van Craenenbroeck M, Glibert M, Christiaens V, et al
     Screw loosening in angulation-correcting single implant restorations: A systematic review of in vitro studies.
     J Prosthet Dent. 2024;132:520-527.
     PubMed     Abstract available
     
     
     August 2024
181. WANG Y, Zhang L, Xie B, Lu Y, et al
     The 50 most cited articles on soft tissue integration of dental implants: A bibliometric analysis.
     J Prosthet Dent. 2024 Aug 15:S0022-3913(24)00495.
     PubMed     Abstract available
     
     
     
182. WU Y, Zou S, Lv P, Wang X, et al
     Accuracy of an autonomous dental implant robotic system in dental implant surgery.
     J Prosthet Dent. 2024 Aug 13:S0022-3913(24)00501.
     PubMed     Abstract available
     
     
     
183. MICHELINAKIS G, Apostolakis D, Nikolidakis D, Lapsanis G, et al
     Influence of different scan body design features and intraoral scanners on the congruence between scan body meshes and library files: An in vitro study.
     J Prosthet Dent. 2024;132:454.
     PubMed     Abstract available
     
     
     
184. PRASAD S, Faverani LP, Santiago Junior JF, Sukotjo C, et al
     Attachment systems for mandibular implant-supported overdentures: A systematic review and meta-analysis of randomized controlled trials.
     J Prosthet Dent. 2024;132:354-368.
     PubMed     Abstract available
     
     
     
185. ZHANG W, Huang S, Ye Q, Wei D, et al
     Clinical efficacy of early and delayed loading implants: A systematic review and meta-analysis.
     J Prosthet Dent. 2024;132:343-353.
     PubMed     Abstract available
     
     
     July 2024
186. PARK GS, Chang J, Pyo SW, Kim S, et al
     Effect of scan body designs and internal conical angles on the 3-dimensional accuracy of implant digital scans.
     J Prosthet Dent. 2024;132:190.
     PubMed     Abstract available
     
     
     
187. WANG W, Zhuang M, Tao B, Wang F, et al
     Learning curve of dynamic navigation-assisted zygomatic implant surgery: An in vitro study.
     J Prosthet Dent. 2024;132:178.
     PubMed     Abstract available
     
     
     
188. PINTO RJ, Casado SA, Chmielewski K, Carames JM, et al
     Accuracy of different digital acquisition methods in complete arch implant-supported prostheses: An in vitro study.
     J Prosthet Dent. 2024;132:172-177.
     PubMed     Abstract available
     
     
     
189. AGUSTIN-PANADERO R, Baixauli-Lopez M, Fernandez-Estevan L, Senent-Vicente G, et al
     Resistance to loosening of intentionally shortened screws used to solve the unsuccessful removal of fractured prosthetic screws.
     J Prosthet Dent. 2024;132:165-171.
     PubMed     Abstract available
     
     
     
190. AZEVEDO L, Marques T, Karasan D, Fehmer V, et al
     Effect of splinting scan bodies on the trueness of complete arch digital implant scans with 5 different intraoral scanners.
     J Prosthet Dent. 2024;132:204-210.
     PubMed     Abstract available
     
     
     
191. BURGOA S, Jony de Moura E Costa A, Ventura D, Pinhata-Baptista OH, et al
     Digital workflow for definitive immediately loaded complete arch CAD-CAM implant-supported prosthesis in 3 appointments without using intraoral scanning.
     J Prosthet Dent. 2024;132:31-36.
     PubMed     Abstract available
     
     
     June 2024
192. WANG W, Li X, Yao C, Zhao B, et al
     Robotic dental implant placement workflow for edentulous jaws.
     J Prosthet Dent. 2024 Jun 24:S0022-3913(24)00350.
     PubMed     Abstract available
     
     
     
193. FATHI A, Mosharraf R, Ghorbani M, Saberipour S, et al
     Effect of shape and design of the internal connection of tissue-level and bone-level implants on detorque values and removal forces: An in vitro study.
     J Prosthet Dent. 2024;131:1135.
     PubMed     Abstract available
     
     
     
194. DONMEZ MB, Mathey A, Gaumann F, Mathey A, et al
     Scan accuracy and time efficiency of different implant-supported fixed partial denture situations depending on the intraoral scanner and scanned area: An in vitro study.
     J Prosthet Dent. 2024;131:1198-1207.
     PubMed     Abstract available
     
     
     
195. SICILIA E, Lagreca G, Papaspyridakos P, Finkelman M, et al
     Effect of supramucosal height of a scan body and implant angulation on the accuracy of intraoral scanning: An in vitro study.
     J Prosthet Dent. 2024;131:1126-1134.
     PubMed     Abstract available
     
     
     
196. SALGADO-PERALVO AO, Kewalramani N, Linares A, Pelaez-Rico J, et al
     Restoring the functionality of implant-supported prostheses with a reloading technique: A clinical report.
     J Prosthet Dent. 2024;131:1000-1003.
     PubMed     Abstract available
     
     
     
197. LAWAND G, Ismail Y, Revilla-Leon M, Tohme H, et al
     Effect of implant scan body geometric modifications on the trueness and scanning time of complete arch intraoral implant digital scans: An in vitro study.
     J Prosthet Dent. 2024;131:1189-1197.
     PubMed     Abstract available
     
     
     
198. PARK YH, Oh WS, Lee JJ
     Digital workflow for creating a coolant channel for direct irrigation through an implant surgical guide.
     J Prosthet Dent. 2024;131:1021-1024.
     PubMed     Abstract available
     
     
     
199. MOUZINHO-MACHADO S, Borges GB, Pacheco-de-Oliveira-Mota V, de-Azevedo-Vaz SL, et al
     Does enhancement filter application increase the diagnostic accuracy of misfit detection at the implant-prosthesis interface?
     J Prosthet Dent. 2024;131:1136-1143.
     PubMed     Abstract available
     
     
     May 2024
200. BONADIMAN EA, Fachetti EL, Haiter-Neto F, Pereira TCR, et al
     Efficacy of a radiographic film holder adapter in generating radiographs of dental implants with improved geometric accuracy and sharpness.
     J Prosthet Dent. 2024 May 31:S0022-3913(24)00311.
     PubMed     Abstract available
     
     
     
201. HE J, Liu Y, Lin Z, Li Y, et al
     Feasibility of implant placement in healed mandibular molar sites: A retrospective cone beam computed tomography study.
     J Prosthet Dent. 2024;131:904.
     PubMed     Abstract available
     
     
     
202. CHEN J, Bu L, Xu G
     Identifying an optimal approach for the placement of pterygoid implants: A 3D finite element analysis.
     J Prosthet Dent. 2024;131:917.
     PubMed     Abstract available
     
     
     
203. ALQUTAIBI AY, Hamadallah HH, Almuzaini AS, Aloufi AM, et al
     Comprehensive analysis of the maxillary esthetic zone for immediate implant placement using cone beam computed tomography: A study of 352 maxillary images.
     J Prosthet Dent. 2024;131:903.
     PubMed     Abstract available
     
     
     
204. RIBEIRO AKC, Costa RTF, Vasconcelos BCDE, de Moraes SLD, et al
     Patient-reported outcome measures and prosthetic events in implant-supported mandibular overdenture patients after immediate versus delayed loading: A systematic review and meta-analysis.
     J Prosthet Dent. 2024;131:833-840.
     PubMed     Abstract available
     
     
     
205. FATHI A, Rismanchian M, Khodadadi R, Dezaki SN, et al
     Does the crown-implant ratio affect the survival and complications of implant-supported prostheses? A systematic review.
     J Prosthet Dent. 2024;131:819-825.
     PubMed     Abstract available
     
     
     
206. LIANG L, Wu X, Yan Q, Shi B, et al
     Are short implants (
     J Prosthet Dent. 2024;131:826-832.
     PubMed     Abstract available
     
     
     
207. HAMILTON A, Griseto N, Negreiros WM, Gallucci GO, et al
     Digital articulation of a complete arch fixed implant prosthesis using the implant prosthetic connections: A dental technique.
     J Prosthet Dent. 2024;131:793-799.
     PubMed     Abstract available
     
     
     April 2024
208. YUE G, Huang W, Weng B, Wang S, et al
     Axial and tilted implant surgical technique assisted by an autonomous dental implant robot: A clinical report.
     J Prosthet Dent. 2024 Apr 29:S0022-3913(24)00243.
     PubMed     Abstract available
     
     
     
209. ALQUTAIBI AY, Algabri R, Ibrahim WI, Alhajj MN, et al
     Dental implant planning using artificial intelligence: A systematic review and meta-analysis.
     J Prosthet Dent. 2024 Apr 22:S0022-3913(24)00227.
     PubMed     Abstract available
     
     
     
210. ENGELSCHALK M, Al Hamad KQ, Mangano R, Smeets R, et al
     Corrigendum to: 'Dental implant placement with immersive technologies: A preliminary clinical report of augmented and mixed reality applications' [The Journal of Prosthetic Dentistry (2024)].
     J Prosthet Dent. 2024 Apr 18:S0022-3913(24)00216.
     PubMed    
     
     
     
211. SU X, Wang G, Zhao B, Wang X, et al
     Maxillary sinus floor elevation for implant placement assisted by an autonomous dental implant robotic system: A clinical report.
     J Prosthet Dent. 2024 Apr 15:S0022-3913(24)00241.
     PubMed     Abstract available
     
     
     
212. GAIKWAD A, Parizi MK, Winkel A, Stiesch M, et al
     Osteoblast cell behavior on polyetheretherketone dental implant surfaces treated with different grit size aluminum oxide particles: An in vitro analysis.
     J Prosthet Dent. 2024 Apr 8:S0022-3913(24)00148.
     PubMed     Abstract available
     
     
     
213. ANWAR H, Azer A, AboElHassan RG
     Influence of a specially designed geometric device and modified scan bodies on the accuracy of a maxillary complete arch digital implant scan: An in vitro study.
     J Prosthet Dent. 2024;131:683.
     PubMed     Abstract available
     
     
     
214. ZOU J, Li L
     An indirect method of verifying passive fit of complete arch implant-supported frameworks fabricated from photogrammetry scans.
     J Prosthet Dent. 2024;131:756-759.
     PubMed    
     
     
     
215. PATIL PG, Seow LL, Uddanwadikar R, Pau A, et al
     Different implant diameters and their effect on stress distribution pattern in 2-implant mandibular overdentures: A 3D finite element analysis study.
     J Prosthet Dent. 2024;131:675-682.
     PubMed     Abstract available
     
     
     
216. PEI X, Liu X, Iao S, Ma F, et al
     Accuracy of 3 calibration methods of computer-assisted dynamic navigation for implant placement: An in vitro study.
     J Prosthet Dent. 2024;131:668-674.
     PubMed     Abstract available
     
     
     
217. DAOU EE
     Effect of lamination layer thickness and abutment preparation on the fit of Co-Cr multi-unit prostheses fabricated by additive manufacturing: An in vitro study.
     J Prosthet Dent. 2024;131:652-657.
     PubMed     Abstract available
     
     
     
218. GAMA LT, Bezerra AP, Schimmel M, Rodrigues Garcia RCM, et al
     Clinical performance of polymer frameworks in dental prostheses: A systematic review.
     J Prosthet Dent. 2024;131:579-590.
     PubMed     Abstract available
     
     
     
219. CALAZANS NETO JV, Kreve S, Valente MLDC, Reis ACD, et al
     Protein absorption on titanium surfaces treated with a high-power laser: A systematic review.
     J Prosthet Dent. 2024;131:591-597.
     PubMed     Abstract available
     
     
     
220. KURIAN N, Varghese KG, Daniel S, Varghese VS, et al
     Are YouTube videos on complete arch fixed implant-supported prostheses useful for patient education?
     J Prosthet Dent. 2024;131:684-688.
     PubMed     Abstract available
     
     
     March 2024
221. KHAN M, Javed F, Haji Z, Ghafoor R, et al
     Comparison of the positional accuracy of robotic guided dental implant placement with static guided and dynamic navigation systems: A systematic review and meta-analysis.
     J Prosthet Dent. 2024 Mar 14:S0022-3913(24)00130.
     PubMed     Abstract available
     
     
     
222. ENGELSCHALK M, Al Hamad KQ, Mangano R, Smeets R, et al
     Dental implant placement with immersive technologies: A preliminary clinical report of augmented and mixed reality applications.
     J Prosthet Dent. 2024 Mar 12:S0022-3913(24)00141.
     PubMed     Abstract available
     
     
     
223. SINSAREEKUL C, Saengthong-Aram P, Limpuangthip N
     Survival, complications, and patient-reported outcomes of endodontically treated teeth versus dental implant-supported prostheses: A systematic review.
     J Prosthet Dent. 2024 Mar 4:S0022-3913(24)00121.
     PubMed     Abstract available
     
     
     
224. JIA P, Yang J
     Biofilm accumulation on complete arch subperiosteal implant-supported prostheses: Effect of pontic type.
     J Prosthet Dent. 2024;131:478.
     PubMed     Abstract available
     
     
     
225. CONEJO J, Yoo TH, Atria PJ, Fraiman H, et al
     In vitro comparative study between complete arch conventional implant impressions and digital implant scans with scannable pick-up impression copings.
     J Prosthet Dent. 2024;131:475.
     PubMed     Abstract available
     
     
     
226. SETH C, Bawa A, Gotfredsen K
     Digital versus conventional prosthetic workflow for dental students providing implant-supported single crowns: A randomized crossover study.
     J Prosthet Dent. 2024;131:450-456.
     PubMed     Abstract available
     
     
     
227. LIU Q, Liu Y, Chen D, Wu X, et al
     Placement accuracy and primary stability of implants in the esthetic zone using dynamic and static computer-assisted navigation: A retrospective case-control study.
     J Prosthet Dent. 2024;131:427-435.
     PubMed     Abstract available
     
     
     
228. ALFAIFI MA, Wadhwani C, Schwedhelm ER, Kattadiyil MT, et al
     Evaluating the effect of the protector cap for castable implant abutments on reverse tightening values.
     J Prosthet Dent. 2024;131:476.
     PubMed     Abstract available
     
     
     
229. CHEN S, Li R, Wu Z, Wang J, et al
     An implant-supported overdenture for a mandibular defect after tumor resection guided by 3-dimensional finite element analysis: A clinical report.
     J Prosthet Dent. 2024;131:531-536.
     PubMed     Abstract available
     
     
     
230. REARY JA, Katsavochristou A, Powers JM, Kiat-Amnuay S, et al
     Effect of surface pretreatment and artificial aging on the retention of lithium disilicate crowns cemented to zirconia implant abutments.
     J Prosthet Dent. 2024;131:459-467.
     PubMed     Abstract available
     
     
     
231. SINGTHONG W, Serichetaphongse P, Chengprapakorn W
     A randomized clinical trial on the accuracy of guided implant surgery between two implant-planning programs used by inexperienced operators.
     J Prosthet Dent. 2024;131:436-442.
     PubMed     Abstract available
     
     
     
232. DE HOLANDA CAVALCANTI PEREIRA , de Oliveira Limirio JPJ, Cavalcanti do Egito Vasconcelos B, Pellizzer EP, et al
     Mechanical behavior of titanium and zirconia abutments at the implant-abutment interface: A systematic review.
     J Prosthet Dent. 2024;131:420-426.
     PubMed     Abstract available
     
     
     February 2024
233. GODANI A, Iyer J, Nadgere J, Mohite A, et al
     Impact of immediate interim restoration on peri-implant tissues around immediately placed single dental implants in the esthetic region: A systematic review and meta-analysis.
     J Prosthet Dent. 2024 Feb 13:S0022-3913(24)00045.
     PubMed     Abstract available
     
     
     
234. SANTHAVEESUK P, Serichetaphongse P, Kiat-Amnuay S
     Microwave disinfection of facial silicone prostheses, part 2: Mechanical properties.
     J Prosthet Dent. 2024;131:340.
     PubMed     Abstract available
     
     
     
235. OZCIVELEK T, Basmaci F, Turgut B, Akbulut K, et al
     Perception of color mismatch or conspicuous marginal adaptation in extraoral prostheses with eye-tracking.
     J Prosthet Dent. 2024;131:332-339.
     PubMed     Abstract available
     
     
     
236. PATIL PG, Seow LL, Uddanwadikar R, Pau A, et al
     Crestal strain of two-implant mandibular overdentures with implants placed at different positions: An in vitro 3D printed simulation study.
     J Prosthet Dent. 2024;131:281.
     PubMed     Abstract available
     
     
     
237. ATSU S, Erol U
     Marginal fit and fracture resistance of polyetheretherketone, zirconia, and titanium implant-supported prosthesis frameworks for a partially edentulous arch after thermomechanical aging.
     J Prosthet Dent. 2024;131:273-280.
     PubMed     Abstract available
     
     
     
238. KO KH, Park JH, Park CJ, Cho LR, et al
     Response to Letter to the Editor regarding, "Technique to retrieve implant abutment fragments".
     J Prosthet Dent. 2024;131:358-359.
     PubMed    
     
     
     
239. KLES P, Kles K, Ben-Gal G
     Response to comments on "Number of consecutive procedures after endodontic treatment to extraction: A 28-year retrospective study".
     J Prosthet Dent. 2024;131:355.
     PubMed    
     
     
     
240. ZHANG WT, Yang F
     Letter to the Editor regarding "Technique to retrieve implant abutment fragments" by Lee JH, et al.
     J Prosthet Dent. 2024;131:356-357.
     PubMed    
     
     
     
241. ADNAN N, Khan FR
     Comments on "Number of consecutive procedures after endodontic treatment to extraction: A 28-year retrospective study".
     J Prosthet Dent. 2024;131:354.
     PubMed    
     
     
     
242. JANG G, Kim SK, Heo SJ, Koak JY, et al
     Fit analysis of stereolithography-manufactured three-unit resin prosthesis with different 3D-printing build orientations and layer thicknesses.
     J Prosthet Dent. 2024;131:301-312.
     PubMed     Abstract available
     
     
     
243. HWANG JY, Yoon HI
     Comparative analysis of intaglio surface trueness of cement-retained implant-supported prostheses generated by a cast-free digital workflow and a three-dimensionally printed cast workflow.
     J Prosthet Dent. 2024;131:272.
     PubMed     Abstract available
     
     
     
244. MOORTHY A, Aljudaibi S, Donnelly-Swift E, Polyzois I, et al
     An in vitro evaluation of 2 methods for retrieving fractured abutment screw fragments from the intaglio of 4 different implant systems.
     J Prosthet Dent. 2024;131:282-290.
     PubMed     Abstract available
     
     
     
245. RUTKUNAS V, Dirse J, Kules D, Mischitz I, et al
     Misfit simulation on implant prostheses with different combinations of engaging and nonengaging titanium bases. Part 2: Screw resistance test.
     J Prosthet Dent. 2024;131:262-271.
     PubMed     Abstract available
     
     
     
246. SCHNUTENHAUS S, Edelmann C, Wetzel M, Luthardt RG, et al
     Influence of the macrodesign of an implant and the sleeve system on the accuracy of template-guided implant placement: A prospective clinical study.
     J Prosthet Dent. 2024;131:212-219.
     PubMed     Abstract available
     
     
     
247. GIRUNDI ALG, Ribeiro MCO, Vargas-Moreno VF, Borges GA, et al
     Patient-reported outcome measures and clinical performance of implant-retained mandibular overdentures with stud and ball attachments: A systematic review and meta-analysis.
     J Prosthet Dent. 2024;131:197-211.
     PubMed     Abstract available
     
     
     
248. CHEN Z, Liu Y, Xie X, Deng F, et al
     Influence of bone density on the accuracy of artificial intelligence-guided implant surgery: An in vitro study.
     J Prosthet Dent. 2024;131:254-261.
     PubMed     Abstract available
     
     
     
249. XIE C, Fang T, Wang Y, Yu H, et al
     A digital workflow for the fabrication of an immediate implant-supported interim restoration.
     J Prosthet Dent. 2024;131:180-186.
     PubMed     Abstract available
     
     
     January 2024
250. GAIKWAD A, Rachh P, Raut K
     Critical evaluation of YouTube videos regarding the all-on-4 dental implant treatment concept: A content-quality analysis.
     J Prosthet Dent. 2024 Jan 11:S0022-3913(23)00821.
     PubMed     Abstract available
     
     
     
251. DASHTI M, Londono J, Ghasemi S, Tabatabaei S, et al
     Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images: A systematic review and meta-analysis.
     J Prosthet Dent. 2024 Jan 3:S0022-3913(23)00812.
     PubMed     Abstract available
     
     
     
252. RATNA NAG V, Ramanathan M, Puppala S, Roy M, et al
     Straightforward techniques for selecting and organizing multiunit abutment prosthetic components.
     J Prosthet Dent. 2024;131:172-174.
     PubMed    
     
     
     
253. BI Y, Wei H
     Fully digital workflow for the rehabilitation of a total nasal defect with a prosthesis.
     J Prosthet Dent. 2024;131:167-171.
     PubMed     Abstract available
     
     
     
254. GOMEZ-POLO M, Sallorenzo A, Ortega R, Gomez-Polo C, et al
     Influence of implant angulation and clinical implant scan body height on the accuracy of complete arch intraoral digital scans.
     J Prosthet Dent. 2024;131:119-127.
     PubMed     Abstract available
     
     
     
255. YILMAZ H, Arinc H, Cakmak G, Atalay S, et al
     Effect of scan pattern on the scan accuracy of a combined healing abutment scan body system.
     J Prosthet Dent. 2024;131:110-118.
     PubMed     Abstract available
     
     
     December 2023
256. ALQUTAIBI AY, Algabri RS, Elawady D, Ibrahim WI, et al
     Advancements in artificial intelligence algorithms for dental implant identification: A systematic review with meta-analysis.
     J Prosthet Dent. 2023 Dec 28:S0022-3913(23)00783.
     PubMed     Abstract available
     
     
     
257. CHEN D, Chen J, Wu X, Chen Z, et al
     Prediction of primary stability via the force feedback of an autonomous dental implant robot.
     J Prosthet Dent. 2023 Dec 6:S0022-3913(23)00755.
     PubMed     Abstract available
     
     
     
258. GIGLIO GD, Giglio AB
     Achieving optimal implant esthetics using a team approach: Part 2 treatment options, treatment coordination, and integration of digital technology.
     J Prosthet Dent. 2023;130:805-806.
     PubMed     Abstract available
     
     
     
259. AZPIAZU-FLORES FX, Mata-Mata SJ, Lee DJ
     Detection of mandibular flexure with a dental plaster verification device: A clinical report with video recording.
     J Prosthet Dent. 2023;130:807-810.
     PubMed     Abstract available
     
     
     
260. ASSAF A, Saad M, Hijawi S
     Use of narrow-diameter implants in the posterior segments of the jaws: A retrospective observational study of 2 to 11 years.
     J Prosthet Dent. 2023;130:840-848.
     PubMed     Abstract available
     
     
     
261. YANG Q, Guan X, Wang B, Zhang D, et al
     Implant survival rate and marginal bone loss with the all-on-4 immediate-loading strategy: A clinical retrospective study with 1 to 4 years of follow-up.
     J Prosthet Dent. 2023;130:849-857.
     PubMed     Abstract available
     
     
     November 2023
262. FAVERANI LP, Rios BR, Santos AMS, Mendes BC, et al
     Predictability of single versus double-barrel vascularized fibula flaps and dental implants in mandibular reconstructions: A systematic review and meta-analysis of prospective studies.
     J Prosthet Dent. 2023 Nov 15:S0022-3913(23)00686.
     PubMed     Abstract available
     
     
     
263. MANDOURAH H, Houssein Ali HS, Li R, Mozayen AA, et al
     Effect of mastication load on retention force of custom-made LOCATOR abutments manufactured for angled implants: An in vitro study.
     J Prosthet Dent. 2023;130:740.
     PubMed     Abstract available
     
     
     
264. LANG LK, Karl M, Klar V
     Evaluation of different debridement strategies for implant-abutment connections: An in vitro study.
     J Prosthet Dent. 2023;130:738.
     PubMed     Abstract available
     
     
     
265. GIGLIO GD, Giglio AB
     Achieving optimal implant esthetics using a team approach Part 1 a review of evidence-based criteria in implant treatment.
     J Prosthet Dent. 2023;130:661-662.
     PubMed     Abstract available
     
     
     
266. BHUMPATTARACHAI S, Kan JYK, Goodacre CJ, Swamidass RS, et al
     Effects of cyclic loading on loss of abutment screw torque of angled screw channel single implant crowns on narrow diameter implants.
     J Prosthet Dent. 2023;130:741.
     PubMed     Abstract available
     
     
     
267. STRAZZI-SAHYON HB, Bergamo ETP, Gierthmuehlen PC, Lopes ACO, et al
     In vitro assessment of the effect of luting agents, abutment height, and fatigue on the retention of zirconia crowns luted to titanium base implant abutments.
     J Prosthet Dent. 2023;130:739.
     PubMed     Abstract available
     
     
     
268. JEONG SH, Kim S, Seong YW, Chang JS, et al
     Implant-retained overdenture delivery in 2 visits with a digital workflow.
     J Prosthet Dent. 2023;130:663-667.
     PubMed     Abstract available
     
     
     
269. BORGES GA, Codello DJ, Del Rio Silva L, Dini C, et al
     Factors and clinical outcomes for standard and mini-implants retaining mandibular overdentures: A systematic review and meta-analysis.
     J Prosthet Dent. 2023;130:677-689.
     PubMed     Abstract available
     
     
     
270. ZHU N, Liu J, Ma T, Zhang Y, et al
     A fully digital workflow for prosthetically driven alveolar augmentation with intraoral bone block and implant rehabilitation in an atrophic anterior maxilla.
     J Prosthet Dent. 2023;130:668-673.
     PubMed     Abstract available
     
     
     
271. KESAR N, Weigl P, Nentwig GH, Krebs M, et al
     Prevalence and risk of peri-implant diseases based on the type of prosthetic restoration: A retrospective study after 17 to 23 years.
     J Prosthet Dent. 2023;130:690-697.
     PubMed     Abstract available
     
     
     
272. FENG Y, Yao Y, Yang X
     Effect of a dynamic navigation device on the accuracy of implant placement in the completely edentulous mandible: An in vitro study.
     J Prosthet Dent. 2023;130:731-737.
     PubMed     Abstract available
     
     
     
273. YILMAZ B, Guo X, Schimmel M, Abou-Ayash S, et al
     Effect of industrial scanner and framework material interaction on the marginal gaps of CAD-CAM complete arch implant frameworks.
     J Prosthet Dent. 2023;130:723-730.
     PubMed     Abstract available
     
     
     October 2023
274. THOMKOVA B, Marcian P, Borak L, Joukal M, et al
     Biomechanical performance of dental implants inserted in different mandible locations and at different angles: A finite element study.
     J Prosthet Dent. 2023 Oct 31:S0022-3913(23)00690.
     PubMed     Abstract available
     
     
     
275. NETO JVC, Teixeira ABV, Candido Dos Reis A
     Hydroxyapatite coatings versus osseointegration in dental implants: A systematic review.
     J Prosthet Dent. 2023 Oct 14:S0022-3913(23)00631.
     PubMed     Abstract available
     
     
     
276. NGUYEN O, Lee SJ, Lee JD
     Influence of varying titanium base abutment heights on retention of zirconia restorations: An in vitro study.
     J Prosthet Dent. 2023;130:604.
     PubMed     Abstract available
     
     
     
277. JUNG BY, Park WS, Woo CW, Jeong SA, et al
     Zirconia-veneered polyetherketoneketone frameworks of implant-supported complete arch fixed dental prostheses: A report on 5 patients.
     J Prosthet Dent. 2023;130:419-433.
     PubMed     Abstract available
     
     
     
278. YAN Y, Lin X, Yue X, Geng W, et al
     Accuracy of 2 direct digital scanning techniques-intraoral scanning and stereophotogrammetry-for complete arch implant-supported fixed prostheses: A prospective study.
     J Prosthet Dent. 2023;130:564-572.
     PubMed     Abstract available
     
     
     
279. CIFTCI G, Somay SD, Ozcan I, Ozcelik TB, et al
     Prosthetic complications with mandibular bar-retained implant overdentures having distal attachments and metal frameworks: A 2- to 12-year retrospective analysis.
     J Prosthet Dent. 2023;130:573-580.
     PubMed     Abstract available
     
     
     
280. GARCIA-SALA BONMATI F, Perez-Barquero JA, Ilzarbe Ripoll LM, Labaig Rueda C, et al
     An additively manufactured, magnetically retained, and stackable implant surgical guide: A dental technique.
     J Prosthet Dent. 2023;130:444-452.
     PubMed     Abstract available
     
     
     
281. BORGES GA, Dini C, Medeiros MMD, Rodrigues Garcia RCM, et al
     Funding assistance and global productivity in the field of implant overdentures: A bibliometric analysis of 35 years.
     J Prosthet Dent. 2023;130:553-563.
     PubMed     Abstract available
     
     
     September 2023
282. TIRYAKI B, Ozdogan A, Guller MT, Miloglu O, et al
     Dental implant brand and angle identification using deep neural networks.
     J Prosthet Dent. 2023 Sep 14:S0022-3913(23)00492.
     PubMed     Abstract available
     
     
     
283. HUNG CCU, Costa RC, Pereira G, Abdo VL, et al
     Oral microbial colonization on titanium and polyetheretherketone dental implant healing abutments: An in vitro and in vivo study.
     J Prosthet Dent. 2023 Sep 14:S0022-3913(23)00538.
     PubMed     Abstract available
     
     
     
284. SUKOTJO C, Bertucci DE, Patel JY, Yuan JC, et al
     Evaluating augmented reality e-typodont to improve a patient's dental implant health literacy.
     J Prosthet Dent. 2023 Sep 13:S0022-3913(23)00539.
     PubMed     Abstract available
     
     
     
285. VINNAKOTA DN, Kamatham R, Nagaraj E, Reddy PS, et al
     Is dynamic computer-assisted surgery more accurate than the static method for dental implant placement? A systematic review and meta-analysis.
     J Prosthet Dent. 2023 Sep 8:S0022-3913(23)00493.
     PubMed     Abstract available
     
     
     
286. KONG HJ, Yoo JY, Lee JH, Eom SH, et al
     Performance evaluation of deep learning models for the classification and identification of dental implants.
     J Prosthet Dent. 2023 Sep 5:S0022-3913(23)00467.
     PubMed     Abstract available
     
     
     
287. POOVARODOM P, Rungsiyakull C, Suriyawanakul J, Li Q, et al
     Effect of gingival height of a titanium base on the biomechanical behavior of 2-piece custom implant abutments: A 3-dimensional nonlinear finite element study.
     J Prosthet Dent. 2023;130:380.
     PubMed     Abstract available
     
     
     
288. UNKOVSKIY A, Spintzyk S, Kiemle T, Roehler A, et al
     Trueness and precision of skin surface reproduction in digital workflows for facial prosthesis fabrication.
     J Prosthet Dent. 2023;130:402-413.
     PubMed     Abstract available
     
     
     
289. CURIEL-AGUILERA FP, Griffiths GR, Rossmann JA, Gonzalez JA, et al
     Titanium versus zirconia complete arch implant-supported fixed prostheses: A comparison of plaque accumulation.
     J Prosthet Dent. 2023;130:369-375.
     PubMed     Abstract available
     
     
     
290. GUAN X, Zhang J, Chen Y, Han J, et al
     Changes in bone graft height and influencing factors after sinus floor augmentation by using the lateral window approach: A clinical retrospective study of 1 to 2 years.
     J Prosthet Dent. 2023;130:362-368.
     PubMed     Abstract available
     
     
     
291. HUSSEIN MO
     Photogrammetry technology in implant dentistry: A systematic review.
     J Prosthet Dent. 2023;130:318-326.
     PubMed     Abstract available
     
     
     
292. CAMPS-FONT O, Rubianes-Porta L, Valmaseda-Castellon E, Jung RE, et al
     Comparison of external, internal flat-to-flat, and conical implant abutment connections for implant-supported prostheses: A systematic review and network meta-analysis of randomized clinical trials.
     J Prosthet Dent. 2023;130:327-340.
     PubMed     Abstract available
     
     
     
293. AMID R, Kadkhodazadeh M, Moscowchi A
     Immediate implant placement in compromised sockets: A systematic review and meta-analysis.
     J Prosthet Dent. 2023;130:307-317.
     PubMed     Abstract available
     
     
     August 2023
294. AL-SANEA A, Aktas S, Celik T, Kisioglu Y, et al
     Effects of the internal contact surfaces of dental implants on screw loosening: A 3-dimensional finite element analysis.
     J Prosthet Dent. 2023 Aug 27:S0022-3913(23)00464.
     PubMed     Abstract available
     
     
     
295. ARABBEIKI M, Niroomand MR, Rouhi G
     Improving dental implant stability by optimizing thread design: Simultaneous application of finite element method and data mining approach.
     J Prosthet Dent. 2023 Aug 1:S0022-3913(23)00440.
     PubMed     Abstract available
     
     
     
296. KONSTANTINOVIC VS, Abd-Ul-Salam H, Jelovac D, Ivanjac F, et al
     Pterygoid and tuberosity implants in the atrophic posterior maxilla: A retrospective cohort study.
     J Prosthet Dent. 2023;130:219.
     PubMed     Abstract available
     
     
     
297. CHEN J, Guo J, Yang L, Wang L, et al
     Effect of different implant angulations on the biomechanical performance of prosthetic screws in two implant-supported, screw-retained prostheses: A numerical and experimental study.
     J Prosthet Dent. 2023;130:240.
     PubMed     Abstract available
     
     
     
298. YOSHIDA S, Yamaguchi K, Taniguchi Y, Isshi K, et al
     Design of palatal and lingual augmentation prostheses by using an intraoral scanner for a patient after a glossectomy: A clinical report.
     J Prosthet Dent. 2023;130:267-270.
     PubMed     Abstract available
     
     
     
299. LI XC, Bidra AS
     A technique for improved gingival esthetics on complete arch implant-supported acrylic resin prototype prosthesis.
     J Prosthet Dent. 2023;130:160-163.
     PubMed     Abstract available
     
     
     
300. ZHANG YJ, Qian SJ, Lai HC, Shi JY, et al
     Accuracy of photogrammetric imaging versus conventional impressions for complete arch implant-supported fixed dental prostheses: A comparative clinical study.
     J Prosthet Dent. 2023;130:212-218.
     PubMed     Abstract available
     
     
     
301. SCHUSTER AJ, Possebon APDR, Schinestsck AR, Chagas-Junior OL, et al
     Effect of mandibular bone atrophy on maxillary and mandibular bone remodeling and quality of life with an implant-retained mandibular overdenture after 3 years.
     J Prosthet Dent. 2023;130:220-228.
     PubMed     Abstract available
     
     
     
302. COSTA AJME, Burgoa S, Pinhata-Baptista OH, Gutierrez V, et al
     Digital workflow for image-guided immediate implant placement by using the socket-shield technique and custom abutment in the esthetic area.
     J Prosthet Dent. 2023;130:155-159.
     PubMed     Abstract available
     
     
     
303. ESPONA J, Vidal-Ponsoda C, Quintana P, Henarejos-Domingo V, et al
     A fully digital protocol to provide a fixed interim complete denture for immediate loading for a completely edentulous patient: A dental technique.
     J Prosthet Dent. 2023;130:171-178.
     PubMed     Abstract available
     
     
     July 2023
304. POLI PP, Manfredini M, Oliva N, Bettini S, et al
     Detection and sensing of oral xenobiotics in edentulous patients rehabilitated with titanium dental implants: Insights from a scoping review.
     J Prosthet Dent. 2023 Jul 7:S0022-3913(23)00342.
     PubMed     Abstract available
     
     
     
305. VARGHESE KG, Kurian N, Gandhi N, Mathew JE, et al
     A technique to verify implant abutment position intraorally by using a vacuum thermomolded guide.
     J Prosthet Dent. 2023;130:138-139.
     PubMed    
     
     
     
306. MICHAUD PL, Fokam FY, Kryshtalskyj E, Hamdan N, et al
     Comparison of the torque transferred to the implant-bone interface when tightening abutment screws and when torque testing implants: An in vitro study.
     J Prosthet Dent. 2023;130:96-100.
     PubMed     Abstract available
     
     
     
307. MARTIN ORTEGA N, Banos MA, Martinez J, Revilla-Leon M, et al
     Techniques for locating the screw access hole in cement-retained implant-supported prostheses: A systematic review.
     J Prosthet Dent. 2023;130:48-58.
     PubMed     Abstract available
     
     
     
308. LI J, Att W, Chen Z, Lepidi L, et al
     Prosthetic articulator-based implant rehabilitation virtual patient: A technique bridging implant surgery and reconstructive dentistry.
     J Prosthet Dent. 2023;130:8-13.
     PubMed     Abstract available
     
     
     
309. FARRAG KM, Khamis MM
     Effect of anodized titanium abutment collars on peri-implant soft tissue: A split-mouth clinical study.
     J Prosthet Dent. 2023;130:59-67.
     PubMed     Abstract available
     
     
     
310. TANAKA Y, Dutra V, Lin WS, Levon J, et al
     Evaluation of the accuracy of buccal bone thickness measurement from cone beam computed tomography compared with histologic analysis.
     J Prosthet Dent. 2023;130:68-73.
     PubMed     Abstract available
     
     
     
311. SARAFIDOU K, Vasileiadi G, Louvrou MK, Moldovani E, et al
     Screwmentable implant-supported prostheses: A systematic review.
     J Prosthet Dent. 2023;130:35-47.
     PubMed     Abstract available
     
     
     
312. FERNANDES PF, Grenho L, Fernandes MH, Sampaio-Fernandes JC, et al
     Microgap and bacterial microleakage during the osseointegration period: An in vitro assessment of the cover screw and healing abutment in a platform-switched implant system.
     J Prosthet Dent. 2023;130:87-95.
     PubMed     Abstract available
     
     
     
313. SINADA N, Wang CI
     Fixed prosthodontic rehabilitation for an adult with ectodermal dysplasia using a completely digital workflow.
     J Prosthet Dent. 2023;130:2-7.
     PubMed     Abstract available
     
     
     June 2023
314. JIA S, Wang G, Zhao Y, Wang X, et al
     Accuracy of an autonomous dental implant robotic system versus static guide-assisted implant surgery: A retrospective clinical study.
     J Prosthet Dent. 2023 Jun 6:S0022-3913(23)00284.
     PubMed     Abstract available
     
     
     
315. LIN WS
     Complications related to digital technologies in treating edentulous patients with dental implants-Part II. Computer-guided surgery and prosthetic stages.
     J Prosthet Dent. 2023;129:817-818.
     PubMed     Abstract available
     
     
     
316. PARK S, Chao D, Blackwell KE, Jayanetti J, et al
     Modified vestibuloplasty of the zygomaticoalveolar crest to gain intradefect support for an obturator prosthesis.
     J Prosthet Dent. 2023;129:946-950.
     PubMed     Abstract available
     
     
     
317. PARATELLI A, Vania S, Gomez-Polo C, Ortega R, et al
     Techniques to improve the accuracy of complete arch implant intraoral digital scans: A systematic review.
     J Prosthet Dent. 2023;129:844-854.
     PubMed     Abstract available
     
     
     
318. ODA Y, Mori G, Sasaki H, Furuya Y, et al
     Dimensional changes of buccal bone in the edentulous maxilla with telescopic-retained implant-supported fixed dental prostheses.
     J Prosthet Dent. 2023;129:878-886.
     PubMed     Abstract available
     
     
     
319. CARNEIRO PEREIRA AL, Souza Curinga MR, Melo Segundo HV, da Fonte Porto Carreiro A, et al
     Factors that influence the accuracy of intraoral scanning of total edentulous arches rehabilitated with multiple implants: A systematic review.
     J Prosthet Dent. 2023;129:855-862.
     PubMed     Abstract available
     
     
     
320. JAYANETTI J, Shah K, Chao D, Drago C, et al
     Double sleeve guided placement of quadruple zygomatic implants for rehabilitation of a patient with ectodermal dysplasia: A clinical report.
     J Prosthet Dent. 2023;129:824-830.
     PubMed     Abstract available
     
     
     
321. HOMSI G, Kumar A, Almotairy N, Wester E, et al
     Assessment of masticatory function in older individuals with bimaxillary implant-supported fixed prostheses or with a natural dentition: A case-control study.
     J Prosthet Dent. 2023;129:871-877.
     PubMed     Abstract available
     
     
     
322. SCHUBERT O, Edelhoff D, Schweiger J, Guth JF, et al
     Atraumatic intraoral scans and virtual hybrid casts for custom implant abutments and zirconia implants: Accuracy of the workflow.
     J Prosthet Dent. 2023;129:920-929.
     PubMed     Abstract available
     
     
     
323. LV HX, Rong R, Sa Y
     Radiopaque fiducial markers as an aid to fabrication of an implant surgical guide for a patient with orthodontic brackets: A dental technique.
     J Prosthet Dent. 2023;129:835-839.
     PubMed     Abstract available
     
     
     
324. ROCHA COM, Longhini D, Pereira RP, Lima ALO, et al
     Masticatory efficiency in complete denture and single implant-retained mandibular overdenture wearers with different occlusion schemes: A randomized clinical trial.
     J Prosthet Dent. 2023;129:888-894.
     PubMed     Abstract available
     
     
     
325. WANG T, Ye L, Sun Y, Wu Y, et al
     Fabricating a surgical template for guiding sinus floor elevation in the maxillary sinus septa with simultaneous implant placement: A dental technique.
     J Prosthet Dent. 2023;129:840-843.
     PubMed     Abstract available
     
     
     
326. WEBER KR, Meneghetti DE, Benetti P, Della Bona A, et al
     Influence of piston material on the fatigue behavior of a glass-ceramic.
     J Prosthet Dent. 2023;129:931-937.
     PubMed     Abstract available
     
     
     May 2023
327. ELNASHOUKATY HM, ElDakkak S, Abdelhakim A
     Accuracy of a custom two-piece surgical guide for all-on-four dental implant placement: An in vitro study.
     J Prosthet Dent. 2023 May 23:S0022-3913(23)00279.
     PubMed     Abstract available
     
     
     
328. LIN WS
     Complications related to digital technologies in treating edentulous patients with implant-supported prostheses. Part 1: Digital data collection and surgical planning stages.
     J Prosthet Dent. 2023;129:674-675.
     PubMed     Abstract available
     
     
     
329. ARTOPOULOU II, Zinelis S, Lemon JC, Polyzois G, et al
     Effect of spatial arrangement and clinical service lifetime simulation on the retention of magnetic units used in implant-anchored orbital prostheses.
     J Prosthet Dent. 2023;129:811.
     PubMed     Abstract available
     
     
     
330. WANG SC, Wang JC, Chang CJ, Yuan K, et al
     Interdisciplinary treatment with implant-supported two-unit cantilever prosthesis for a patient with hypodontia: A clinical report.
     J Prosthet Dent. 2023;129:676-680.
     PubMed     Abstract available
     
     
     
331. YI Y, Heo SJ, Koak JY, Kim SK, et al
     Mechanical complications of implant-supported restorations with internal conical connection implants: A 14-year retrospective study.
     J Prosthet Dent. 2023;129:732-740.
     PubMed     Abstract available
     
     
     
332. YANG S, Liu Y, Zhang S, Yue L, et al
     A cast-free approach to fabricating an implant-supported interim restoration: A dental technique.
     J Prosthet Dent. 2023;129:690-695.
     PubMed     Abstract available
     
     
     April 2023
333. LAMPKIN A, Bensoussan J, Curtis D, Koka S, et al
     Effect of self-reported clinician experience level on perceptions of the relative rankings of risk factors for biological complications with dental implant therapy.
     J Prosthet Dent. 2023 Apr 21:S0022-3913(23)00185.
     PubMed     Abstract available
     
     
     
334. SIGILIAO CELLES CA, Ferreira I, Valente MDLDC, Dos Reis AC, et al
     Osseointegration in relation to drilling speed in the preparation of dental implants sites: A systematic review.
     J Prosthet Dent. 2023 Apr 3:S0022-3913(23)00138.
     PubMed     Abstract available
     
     
     
335. VARGHESE KG, Kurian N, Gandhi N, Gandhi S, et al
     Three-dimensional finite element analysis of zygomatic implants for rehabilitation of patients with a severely atrophic maxilla.
     J Prosthet Dent. 2023;129:597.
     PubMed     Abstract available
     
     
     
336. RUTKUNAS V, Dirse J, Kules D, Simonaitis T, et al
     Misfit simulation on implant prostheses with different combinations of engaging and nonengaging titanium bases. Part 1: Stereomicroscopic assessment of the active and passive fit.
     J Prosthet Dent. 2023;129:589-596.
     PubMed     Abstract available
     
     
     
337. KURIAN N, Gandhi N, Daniel AY, Varghese KG, et al
     A technique for splinting implant impression posts by using nylon sutures.
     J Prosthet Dent. 2023;129:669-670.
     PubMed    
     
     
     
338. MCLAUGHLIN SD, Miller NR, Sabol JV
     Restoration of a nonideally placed anterior implant: A clinical report.
     J Prosthet Dent. 2023;129:523-526.
     PubMed     Abstract available
     
     
     
339. BITTENCOURT TC, Souza Picorelli Assis NM, Ribeiro CG, Ferreira CF, et al
     Evaluation of the peri-implant tissues in the esthetic zone with prefabricated titanium or zirconia abutments: A randomized controlled clinical trial with a minimum follow-up of 7 years.
     J Prosthet Dent. 2023;129:573-581.
     PubMed     Abstract available
     
     
     
340. LEMOS CAA, Nunes RG, Santiago-Junior JF, Marcela de Luna Gomes J, et al
     Are implant-supported removable partial dentures a suitable treatment for partially edentulous patients? A systematic review and meta-analysis.
     J Prosthet Dent. 2023;129:538-546.
     PubMed     Abstract available
     
     
     March 2023
341. LI Z, Xie R, Bai S, Zhao Y, et al
     Implant placement with an autonomous dental implant robot: A clinical report.
     J Prosthet Dent. 2023 Mar 22:S0022-3913(23)00124.
     PubMed     Abstract available
     
     
     
342. TAYLOR TD
     Oscar E. Beder: Pioneer in dental implant research and prosthodontist.
     J Prosthet Dent. 2023 Mar 3:S0022-3913(23)00102.
     PubMed    
     
     
     
343. MUHETAER A, Yang H, Liu Y, Huang C, et al
     Three-dimensionally printed implant surgical guide-related experience, knowledge, attitude, and professional behaviors among 2028 dentists in China: A cross-sectional study.
     J Prosthet Dent. 2023;129:448.
     PubMed     Abstract available
     
     
     
344. LI R, Wu Z, Chen S, Li X, et al
     Biomechanical behavior analysis of four types of short implants with different placement depths using the finite element method.
     J Prosthet Dent. 2023;129:447.
     PubMed     Abstract available
     
     
     
345. CAKMAK G, Herren KV, Donmez MB, Kahveci C, et al
     Effect of coffee thermocycling on the surface roughness and stainability of nanographene-reinforced polymethyl methacrylate used for fixed definitive prostheses.
     J Prosthet Dent. 2023;129:507.
     PubMed     Abstract available
     
     
     
346. CHO JH, Yoon HI, Oh JH, Kim DH, et al
     Effect of maximum support attachment angle on intaglio surface trueness of anatomic contour monolithic prostheses manufactured by digital light processing and zirconia suspension.
     J Prosthet Dent. 2023;129:478-485.
     PubMed     Abstract available
     
     
     
347. PEREZ-GIUGOVAZ MG, Sadeghpour M, Revilla-Leon M
     Virtual 3-dimensional representation of a completely edentulous patient for computer-aided static implant planning.
     J Prosthet Dent. 2023;129:384-390.
     PubMed     Abstract available
     
     
     
348. BENTO VAA, Gomes JML, Lemos CAA, Limirio JPJO, et al
     Prevalence of proximal contact loss between implant-supported prostheses and adjacent natural teeth: A systematic review and meta-analysis.
     J Prosthet Dent. 2023;129:404-412.
     PubMed     Abstract available
     
     
     
349. ABDEL RAHEEM IM, Yehia SA, Hammad IA
     A device to facilitate separation of components of combined screw- and cement-retained implant-supported crowns.
     J Prosthet Dent. 2023;129:391-394.
     PubMed     Abstract available
     
     
     
350. LIU M, Wang S, Chen H, Liu Y, et al
     A technique to fabricate a custom CAD-CAM periapical radiographic film holder for implant assessment.
     J Prosthet Dent. 2023;129:400-403.
     PubMed     Abstract available
     
     
     
351. BEDOUIN Y, Lefrancois E, Salomon JP, Auroy P, et al
     Abutment rotational freedom on five implant systems with different internal connections.
     J Prosthet Dent. 2023;129:433-439.
     PubMed     Abstract available
     
     
     
352. NEGREIROS WM, Chanting Sun T, Gallucci GO, Hamilton A, et al
     Digital verification and correction of digital intraoral scans for fixed implant rehabilitation of edentulous arches: A dental technique.
     J Prosthet Dent. 2023;129:395-399.
     PubMed     Abstract available
     
     
     February 2023
353. VARGAS-MORENO VF, Ribeiro MCO, Gomes RS, Faot F, et al
     Clinical performance of short and extrashort dental implants with wide diameter: A systematic review with meta-analysis.
     J Prosthet Dent. 2023 Feb 23:S0022-3913(23)00010.
     PubMed     Abstract available
     
     
     
354. LEONARD JF, Taxel P, Kuo CL, Da Cunha Godoy L, et al
     Dental implant and bone augmentation treatment in bone-compromised patients: Oral health-related quality of life outcomes.
     J Prosthet Dent. 2023 Feb 18:S0022-3913(23)00049.
     PubMed     Abstract available
     
     
     
355. BORNES RS, Montero J, Correia ARM, Rosa NRDN, et al
     Use of bioinformatic strategies as a predictive tool in implant-supported oral rehabilitation: A scoping review.
     J Prosthet Dent. 2023;129:322.
     PubMed     Abstract available
     
     
     
356. NICCHIO N, Goncalves V, Mendonca G, Sales E Pessoa R, et al
     Accuracy of partially and fully guided surgical techniques for immediate implant placement: An in vitro assessment.
     J Prosthet Dent. 2023;129:363.
     PubMed     Abstract available
     
     
     
357. LAVERTY DP, Addison O, Newsum D, Bateman G, et al
     Prosthodontic complications during implant-based oral rehabilitation of patients with head and neck cancer.
     J Prosthet Dent. 2023;129:366-372.
     PubMed     Abstract available
     
     
     
358. MILLS CB, Steinberg J, Rubenstein JE, Lee PP, et al
     A successful implant-supported fixed prosthesis in a patient with osteopetrosis: A clinical report.
     J Prosthet Dent. 2023;129:247-250.
     PubMed     Abstract available
     
     
     
359. REVILLA-LEON M, Gomez-Polo M, Vyas S, Barmak AB, et al
     Artificial intelligence models for tooth-supported fixed and removable prosthodontics: A systematic review.
     J Prosthet Dent. 2023;129:276-292.
     PubMed     Abstract available
     
     
     
360. CHAO D, Chang TL
     Use of zirconia onlays in a maxillary removable implant-supported denture: A clinical report.
     J Prosthet Dent. 2023;129:251-256.
     PubMed     Abstract available
     
     
     
361. TAK S, Noh G, Jeong Y, Lee H, et al
     Automated vector analysis to design implant-supported prostheses: A dental technique.
     J Prosthet Dent. 2023;129:257-261.
     PubMed     Abstract available
     
     
     
362. PARK J, Yoo JJ, Yoon JH
     Retrofitting of an implant-supported surveyed crown under an existing removable partial denture by using an acrylic resin template.
     J Prosthet Dent. 2023;129:271-275.
     PubMed     Abstract available
     
     
     
363. REVILLA-LEON M, Gomez-Polo M, Vyas S, Barmak BA, et al
     Artificial intelligence applications in implant dentistry: A systematic review.
     J Prosthet Dent. 2023;129:293-300.
     PubMed     Abstract available
     
     
     
364. ZHANG R, Li S, Liu Y
     Assessing the accuracy of fabricated implant surgical guides by reconstructing the implant position based on cone beam computed tomography images: A dental technique.
     J Prosthet Dent. 2023;129:267-270.
     PubMed     Abstract available
     
     
     
365. TOHME H, Lawand G, Chmielewska M, Makhzoume J, et al
     Comparison between stereophotogrammetric, digital, and conventional impression techniques in implant-supported fixed complete arch prostheses: An in vitro study.
     J Prosthet Dent. 2023;129:354-362.
     PubMed     Abstract available
     
     
     January 2023
366. YAN Y, Yue X, Lin X, Geng W, et al
     A completely digital workflow aided by cone beam computed tomography scanning to maintain jaw relationships for implant-supported fixed complete dentures: A clinical study.
     J Prosthet Dent. 2023;129:116-124.
     PubMed     Abstract available
     
     
     
367. MENDES FSF, Moura Dos Santos AC, Oliveira VC, Macedo AP, et al
     Comparative analysis of Candida spp. isolated from complete denture wearers with and without an HIV diagnosis.
     J Prosthet Dent. 2023;129:140-146.
     PubMed     Abstract available
     
     
     
368. CAI B, Tong Z, Qian Y, Zhu W, et al
     Immediate loaded fixed complete dentures supported by implants in patients with a history of periodontitis: A retrospective cohort study of 2 to 7 years.
     J Prosthet Dent. 2023;129:125-130.
     PubMed     Abstract available
     
     
     
369. SU FY, Segal A
     Use of aluminum foil to facilitate open-tray implant impressions.
     J Prosthet Dent. 2023;129:239-240.
     PubMed    
     
     
     
370. POZZI A, Arcuri L, Fabbri G, Singer G, et al
     Long-term survival and success of zirconia screw-retained implant-supported prostheses for up to 12 years: A retrospective multicenter study.
     J Prosthet Dent. 2023;129:96-108.
     PubMed     Abstract available
     
     
     
371. REVILLA-LEON M, Rubenstein J, Methani MM, Piedra-Cascon W, et al
     Trueness and precision of complete-arch photogrammetry implant scanning assessed with a coordinate-measuring machine.
     J Prosthet Dent. 2023;129:160-165.
     PubMed     Abstract available
     
     
     
372. AYYADANVEETTIL P, Thavakkara V, Koodakkadavath S, Thavakkal A, et al
     Influence of collar height of definitive restoration and type of luting cement on the amount of residual cement in implant restorations: A clinical study.
     J Prosthet Dent. 2023;129:109-115.
     PubMed     Abstract available
     
     
     
373. CARNEIRO PEREIRA AL, Pinto Campos MFT, Porto de Freitas RFC, Paiva Torres ACS, et al
     Partially digital workflow for making complete-arch implant-supported fixed prostheses: A dental technique.
     J Prosthet Dent. 2023;129:18-23.
     PubMed     Abstract available
     
     
     December 2022
374. LUFT RL, da Rosa LS, Machado PS, Valandro LF, et al
     Influence of connector cross-sectional geometry on the load-bearing capacity under fatigue of implant-supported zirconia fixed partial prosthesis.
     J Prosthet Dent. 2022;128:1335.
     PubMed     Abstract available
     
     
     
375. KIM YJ, Ko KH, Park CJ, Cho LR, et al
     Connector design effects on the in vitro fracture resistance of 3-unit monolithic prostheses produced from 4 CAD-CAM materials.
     J Prosthet Dent. 2022;128:1319.
     PubMed     Abstract available
     
     
     
376. BAE S, Mai HN, Lee DH
     Accuracy of digitally fabricated drilling guide to form screw-access channels in cement-retained implant prostheses: A randomized clinical trial.
     J Prosthet Dent. 2022;128:1282.
     PubMed     Abstract available
     
     
     
377. ZHANG H, Ramos V Jr, Bratos M, Liu PP, et al
     Effect of the attachments on clinical outcomes of mandibular distal extension implant-supported removable partial dentures: A systematic review.
     J Prosthet Dent. 2022;128:1211-1220.
     PubMed     Abstract available
     
     
     
378. DHOLAM KP, Singh GP, Sathaye N, Gurav SV, et al
     Two-piece oral facial prothesis retained with magnets for a complex maxillary facial defect: A clinical report.
     J Prosthet Dent. 2022;128:1365-1368.
     PubMed     Abstract available
     
     
     
379. KNOBLOCH LA, Larsen P, McGlumphy E, Kim DG, et al
     Prospective cohort study to evaluate narrow diameter implants for restoration of a missing lateral incisor in patients with a cleft palate: One-year results.
     J Prosthet Dent. 2022;128:1265-1274.
     PubMed     Abstract available
     
     
     
380. YANG J, Liu Q, Shiba T, Ji C, et al
     Application of digital prosthodontics and connective tissue grafting in the management of peri-implant mucosal recession around a malpositioned 1-piece implant: A clinical report.
     J Prosthet Dent. 2022;128:1145-1151.
     PubMed     Abstract available
     
     
     
381. FONSECA M, Molinero-Mourelle P, Buser R, Yilmaz B, et al
     Fabrication of an implant-retained overdenture with ceramic crowns cemented on a polyetherketoneketone framework: A clinical report.
     J Prosthet Dent. 2022;128:1152-1157.
     PubMed     Abstract available
     
     
     
382. DHOLAM KP, Parkar SP, Dugad JA, Kharade PP, et al
     Development of a psychosocial perception scale and comparison of psychosocial perception of patients with extra oral defects before and after facial prosthesis.
     J Prosthet Dent. 2022;128:1398-1404.
     PubMed     Abstract available
     
     
     
383. ZANDINEJAD A, Liang H, Fisher Cosio NA, Revilla-Leon M, et al
     Fabrication of a complete-arch implant-supported fixed interim prosthesis by using a cone beam computed tomography digital scan for a patient with primordial dwarfism: A dental technique.
     J Prosthet Dent. 2022;128:1179-1183.
     PubMed     Abstract available
     
     
     
384. AYYADANVEETTIL P, Thavakkara V, Latha N, Pavanan M, et al
     Randomized clinical trial of zirconia and polyetheretherketone implant abutments for single-tooth implant restorations: A 5-year evaluation.
     J Prosthet Dent. 2022;128:1275-1281.
     PubMed     Abstract available
     
     
     
385. CANALLATOS P, Jayanetti J, Beumer J
     An implant-retained auricular prosthesis complicated by a modified temporal bone resection.
     J Prosthet Dent. 2022;128:1375-1379.
     PubMed     Abstract available
     
     
     
386. HONG HH, Hong A, Chang CC, Liu HL, et al
     Characteristics of the convergent angles of tapered implants based on a premolar root model.
     J Prosthet Dent. 2022;128:1320-1327.
     PubMed     Abstract available
     
     
     
387. ALQARNI H, Montgomery P, Aponte-Wesson R, Won AM, et al
     Combined rehabilitation of a lower lip defect after resection of floor of mouth cancer: A clinical report.
     J Prosthet Dent. 2022;128:1369-1374.
     PubMed     Abstract available
     
     
     
388. CARNEIRO PEREIRA AL, Carvalho Porto de Freitas RF, de Fatima Trindade Pinto Campos M, Soares Paiva Torres AC, et al
     Trueness of a device for intraoral scanning to capture the angle and distance between implants in edentulous mandibular arches.
     J Prosthet Dent. 2022;128:1310-1317.
     PubMed     Abstract available
     
     
     
389. MEIRA IA, Gama LT, Prado-Tozzi DA, Pinheiro MA, et al
     Speech in implant-supported and removable complete denture wearers: A systematic review.
     J Prosthet Dent. 2022;128:1230-1238.
     PubMed     Abstract available
     
     
     
390. ALQARNI H, Alsaloum M, Alzaid A
     Prosthetic rehabilitation of meth mouth with implant-supported fixed dental prostheses: A clinical report.
     J Prosthet Dent. 2022;128:1140-1144.
     PubMed     Abstract available
     
     
     
391. XIAO T, Peng M, Huang C, Liang S, et al
     Use of ceramic veneers for improving esthetics and extending the service life of an existing cement-retained implant-supported ceramic restoration: A clinical report with a 3-year follow-up.
     J Prosthet Dent. 2022;128:1135-1139.
     PubMed     Abstract available
     
     
     
392. YILMAZ B, Gouveia D, Seghi RR, Johnston WM, et al
     Effect of crown height on the screw joint stability of zirconia screw-retained crowns.
     J Prosthet Dent. 2022;128:1328-1334.
     PubMed     Abstract available
     
     
     
393. WANG CI, Cho SH, Ivey A, Reddy LV, et al
     Combined bone- and mucosa-supported 3D-printed guide for sinus slot preparation and prosthetically driven zygomatic implant placement.
     J Prosthet Dent. 2022;128:1165-1170.
     PubMed     Abstract available
     
     
     November 2022
394. MASSUDA CKM, de Carvalho MR, de Moraes JB, Pallos D, et al
     Accuracy of guided dental implant surgery using a fully digital workflow: A case series.
     J Prosthet Dent. 2022 Nov 10. pii: S0022-3913(22)00635.
     PubMed     Abstract available
     
     
     
395. ALZOUBI FM, Sabti M, Alsarraf E, Alshahrani FA, et al
     Preload evaluation of 2 implant-supported fixed partial denture abutment designs.
     J Prosthet Dent. 2022;128:1067.
     PubMed     Abstract available
     
     
     
396. KURIAN N, Varghese KG, Dhawan K
     Visual inspection of implant screw access hole with an endoscope camera.
     J Prosthet Dent. 2022;128:1128-1129.
     PubMed    
     
     
     
397. SALLORENZO A, Gomez-Polo M
     Comparative study of the accuracy of an implant intraoral scanner and that of a conventional intraoral scanner for complete-arch fixed dental prostheses.
     J Prosthet Dent. 2022;128:1009-1016.
     PubMed     Abstract available
     
     
     
398. ARROYO-CRUZ G, Orozco-Varo A, Dominguez-Cardoso P, Jimenez-Castellanos E, et al
     A comparison of the passive fit of a 3-unit implant-supported fixed partial denture fabricated by lost-wax casting, milling soft metal blocks, or direct metal laser sintering: An in vitro study.
     J Prosthet Dent. 2022;128:1055-1060.
     PubMed     Abstract available
     
     
     
399. POMARES-PUIG C, Sanchez-Garces MA, Jorba-Garcia A
     Dynamic and static computer-guided surgery using the double-factor technique for completely edentulous patients: A dental technique.
     J Prosthet Dent. 2022;128:852-857.
     PubMed     Abstract available
     
     
     
400. CHEN H, Gu T, Lai H, Gu X, et al
     Evaluation of hard tissue 3-dimensional stability around single implants placed with guided bone regeneration in the anterior maxilla: A 3-year retrospective study.
     J Prosthet Dent. 2022;128:919-927.
     PubMed     Abstract available
     
     
     
401. HATAMLEH MM, Watson J, Nuseir A
     Successful prosthetic salvage of a suboptimal autogenous auricular reconstruction with digital technologies: A report of 3 challenging treatments.
     J Prosthet Dent. 2022;128:1103-1108.
     PubMed     Abstract available
     
     
     
402. CANULLO L, Menini M, Bagnasco F, Di Tullio N, et al
     Tissue-level versus bone-level single implants in the anterior area rehabilitated with feather-edge crowns on conical implant abutments: An up to 5-year retrospective study.
     J Prosthet Dent. 2022;128:936-941.
     PubMed     Abstract available
     
     
     
403. AGUSTIN-PANADERO R, Manes-Ferrer JF, Bustamante-Hernandez N, Sola-Ruiz MF, et al
     Implant-supported overdenture with horizontal insertion for treating the edentulous atrophic maxilla: A case series.
     J Prosthet Dent. 2022;128:942-948.
     PubMed     Abstract available
     
     
     
404. LYU M, Di P, Lin Y, Jiang X, et al
     Accuracy of impressions for multiple implants: A comparative study of digital and conventional techniques.
     J Prosthet Dent. 2022;128:1017-1023.
     PubMed     Abstract available
     
     
     
405. COUTINHO PC, Nogueira TE, Leles CR
     Single-implant mandibular overdentures: Clinical, radiographic, and patient-reported outcomes after a 5-year follow-up.
     J Prosthet Dent. 2022;128:949-955.
     PubMed     Abstract available
     
     
     
406. BLASI A, Henarejos-Domingo V, Madeira S, Blasi G, et al
     Stone verification device for verifying the definitive cast of an implant-supported restoration: A dental technique.
     J Prosthet Dent. 2022;128:858-863.
     PubMed     Abstract available
     
     
     October 2022
407. SHIM JS, Li CY, Won JE, Ryu JJ, et al
     Evaluation of microleakage and push-out bond strength of various composite resins for sealing the screw-access channel in implant-supported restorations.
     J Prosthet Dent. 2022;128:764.
     PubMed     Abstract available
     
     
     
408. SADEGHOLVAD M, Ansarifard E, Derafshi R, Dehno SMS, et al
     Comparison of the accuracy of impressions made of 2 implants with interfering axial convergence with CAD-CAM impression copings and the altered cast technique: An in vitro study.
     J Prosthet Dent. 2022;128:745.
     PubMed     Abstract available
     
     
     
409. SILVA GC
     A straightforward technique for removing titanium bases from screw-retained monolithic implant-supported prostheses.
     J Prosthet Dent. 2022;128:837-838.
     PubMed    
     
     
     
410. TAN JZH, Tan MY, See Toh YL, Wong KY, et al
     Three-dimensional positional accuracy of intraoral and laboratory implant scan bodies.
     J Prosthet Dent. 2022;128:735-744.
     PubMed     Abstract available
     
     
     
411. OZAN O, Seker E, Cakmak G, Guo X, et al
     Effect of guide sleeve material, region, diameter, and number of times drills were used on the material loss from sleeves and drills used for surgical guides: An in vitro study.
     J Prosthet Dent. 2022;128:746-753.
     PubMed     Abstract available
     
     
     
412. JUNG HT, Kim HY, Song SY, Park JH, et al
     Accuracy of implant impression techniques with a scannable healing abutment.
     J Prosthet Dent. 2022;128:729-734.
     PubMed     Abstract available
     
     
     
413. REVELL G, Simon B, Mennito A, Evans ZP, et al
     Evaluation of complete-arch implant scanning with 5 different intraoral scanners in terms of trueness and operator experience.
     J Prosthet Dent. 2022;128:632-638.
     PubMed     Abstract available
     
     
     
414. BHATT R, Jurel SK, Chand P, Solanki N, et al
     Functional and psychological evaluation of premenopausal and postmenopausal women after provision of a complete denture prosthesis.
     J Prosthet Dent. 2022;128:674-679.
     PubMed     Abstract available
     
     
     
415. ABDELREHIM A, Abdelhakim A, ElDakkak S
     Influence of different materials on retention behavior of CAD-CAM fabricated bar attachments.
     J Prosthet Dent. 2022;128:765-775.
     PubMed     Abstract available
     
     
     
416. SCHUSTER AJ, Possebon APDR, Bielemann AM, Chagas-Junior OL, et al
     Effect of mandibular residual ridge regularization on peri-implant wound healing when narrow diameter implants are used as overdenture retainers.
     J Prosthet Dent. 2022;128:648-655.
     PubMed     Abstract available
     
     
     
417. ZHANG X, Shao J, Wan Q, Li L, et al
     Interimplant papilla reconstruction at second-stage surgery: A technique.
     J Prosthet Dent. 2022;128:554-559.
     PubMed     Abstract available
     
     
     
418. ZARRATI S, Fathesami S, Manafi A
     Custom nasal stent and columellar reconstruction after a rhinoplasty complication: A clinical report.
     J Prosthet Dent. 2022;128:823-826.
     PubMed     Abstract available
     
     
     
419. LEE H, Jo M, Sailer I, Noh G, et al
     Effects of implant diameter, implant-abutment connection type, and bone density on the biomechanical stability of implant components and bone: A finite element analysis study.
     J Prosthet Dent. 2022;128:716-728.
     PubMed     Abstract available
     
     
     
420. WITTNEBEN JG, Igarashi K, Bragger U, Daniel B, et al
     Vertical eruption of anterior maxillary teeth adjacent to single-implant-supported crowns: An assessment after a 3-year follow-up period.
     J Prosthet Dent. 2022;128:605-610.
     PubMed     Abstract available
     
     
     
421. MANICONE PF, De Angelis P, Rella E, Damis G, et al
     Patient preference and clinical working time between digital scanning and conventional impression making for implant-supported prostheses: A systematic review and meta-analysis.
     J Prosthet Dent. 2022;128:589-596.
     PubMed     Abstract available
     
     
     
422. MOHSEN YH, Kader MA, Abdel Nabi N, Radi IAW, et al
     Satisfaction with resilient denture liner versus acrylic resin telescopic prostheses for patients with ectodermal dysplasia: A nonrandomized crossover clinical trial.
     J Prosthet Dent. 2022;128:656-663.
     PubMed     Abstract available
     
     
     
423. VALENTE MLC, Bolfarini C, de Oliveira DP, Dos Reis AC, et al
     Dental mini-implant designs to support overdentures: Development, biomechanical evaluation, and 3D digital image correlation.
     J Prosthet Dent. 2022;128:754-763.
     PubMed     Abstract available
     
     
     September 2022
424. CONEJO J, Han S, Atria PJ, Stone-Hirsh L, et al
     Full digital workflow to resolve angled adjacent dental implants: A dental technique.
     J Prosthet Dent. 2022 Sep 13. pii: S0022-3913(22)00496.
     PubMed     Abstract available
     
     
     
425. XU X, Ding H, Xu L
     Response to comments on: Short versus standard implants for single-crown restorations in the posterior region: A systematic review and meta-analysis.
     J Prosthet Dent. 2022;128:541-544.
     PubMed    
     
     
     
426. SOARES PM, Cadore-Rodrigues AC, Packaeser MG, Bacchi A, et al
     Masking ability of implant abutment substrates by using different ceramic restorative systems.
     J Prosthet Dent. 2022;128:496.
     PubMed     Abstract available
     
     
     
427. JIA PY, Liu Q, Yang JW, Jiang XT, et al
     Three-dimensional macroscopical quantification of plaque accumulation on implant-supported fixed complete dental prostheses surfaces: A methodological pilot study.
     J Prosthet Dent. 2022;128:467.
     PubMed     Abstract available
     
     
     
428. SADOWSKY SJ
     Comments regarding: Xu X, Hu B, Xu Y, Liu Q, Ding H, Xu L. Short versus standard implants for single-crown restorations in the posterior region: A systematic review and meta-analysis. J Prosthet Dent 2020;124:530-8.
     J Prosthet Dent. 2022;128:541.
     PubMed    
     
     
     
429. REAL-VOLTAS F, Figueras-Alvarez O, Barrocal-Rodriguez S
     Straightforward tip for identifying the type of screwdriver needed for screw-retained implant-supported prostheses.
     J Prosthet Dent. 2022;128:539-540.
     PubMed    
     
     
     
430. PIEDRA-CASCON W, Mostafavi D, Ruiz-de-Gopegui J, Perez-Pevida E, et al
     Fabricating a dual-material, vat-polymerized, additively manufactured static implant surgical guide: A dental technique.
     J Prosthet Dent. 2022;128:233-238.
     PubMed     Abstract available
     
     
     
431. NORONHA OLIVEIRA M, Rega Aguilera V, Suarez Rodriguez JD, Benfatti CAM, et al
     Challenging replacement of a maxillary canine with an implant-supported restoration: A surgical and prosthetic approach.
     J Prosthet Dent. 2022;128:228-232.
     PubMed     Abstract available
     
     
     
432. CAMARGOS GV, Rangel EF, Rangel KF, Machado AR, et al
     Guided implant surgery workflow in edentulous patients: A precise and rapid technique.
     J Prosthet Dent. 2022;128:239-244.
     PubMed     Abstract available
     
     
     
433. SHEN XT, Li JY, Luo X, Feng Y, et al
     Peri-implant marginal bone changes with implant-supported metal-ceramic or monolithic zirconia single crowns: A retrospective clinical study of 1 to 5 years.
     J Prosthet Dent. 2022;128:368-374.
     PubMed     Abstract available
     
     
     
434. CHOCHLIDAKIS K, Ercoli C, Einarsdottir E, Romeo D, et al
     Implant survival and biologic complications of implant fixed complete dental prostheses: An up to 5-year retrospective study.
     J Prosthet Dent. 2022;128:375-381.
     PubMed     Abstract available
     
     
     
435. KNECHTLE N, Wiedemeier D, Mehl A, Ender A, et al
     Accuracy of digital complete-arch, multi-implant scans made in the edentulous jaw with gingival movement simulation: An in vitro study.
     J Prosthet Dent. 2022;128:468-478.
     PubMed     Abstract available
     
     
     
436. MULLA SH, Seghi RR, Johnston WM, Yilmaz B, et al
     Effect of cyclic loading on reverse torque values of angled screw channel systems.
     J Prosthet Dent. 2022;128:458-466.
     PubMed     Abstract available
     
     
     
437. ROIG E, Roig M, Garza LC, Costa S, et al
     Fit of complete-arch implant-supported prostheses produced from an intraoral scan by using an auxiliary device and from an elastomeric impression: A pilot clinical trial.
     J Prosthet Dent. 2022;128:404-414.
     PubMed     Abstract available
     
     
     
438. EDMONDSON EK, Trejo PM, Soldatos N, Weltman RL, et al
     The ability to screw-retain single implant-supported restorations in the anterior maxilla: A CBCT analysis.
     J Prosthet Dent. 2022;128:443-449.
     PubMed     Abstract available
     
     
     
439. TOZUM MD, Ataman-Duruel ET, Duruel O, Nares S, et al
     Association between ridge morphology and complexity of implant placement planning in the posterior mandible.
     J Prosthet Dent. 2022;128:361-367.
     PubMed     Abstract available
     
     
     
440. YANG X, Liu Y, Li Y, Zhao Y, et al
     Accuracy and feasibility of 3D-printed custom open trays for impressions of multiple implants: A self-controlled clinical trial.
     J Prosthet Dent. 2022;128:396-403.
     PubMed     Abstract available
     
     
     
441. LU W, Zhou Y, Yang H, Cheng Z, et al
     Efficacy of strontium supplementation on implant osseointegration under osteoporotic conditions: A systematic review.
     J Prosthet Dent. 2022;128:341-349.
     PubMed     Abstract available
     
     
     
442. SHAH NP, Khanna A, Pai AR, Sheth VH, et al
     An evaluation of virtually planned and 3D-printed stereolithographic surgical guides from CBCT and digital scans: An in vitro study.
     J Prosthet Dent. 2022;128:436-442.
     PubMed     Abstract available
     
     
     August 2022
443. DI GIACOMO GAP, Cury PR, da Silva AM, da Silva JVL, et al
     Surgical guides for flapless dental implant placement and immediate definitive prosthesis installation by using selective laser melting and sintering for 3D metal and polymer printing: A clinical report.
     J Prosthet Dent. 2022 Aug 11. pii: S0022-3913(22)00426.
     PubMed     Abstract available
     
     
     
444. ELSONBATY MA, Alshimy AM, Abdul-Monem MM, Neena AF, et al
     Evaluation of retention and wear of a titanium-formed stud overdenture attachment with different interimplant angulations after simulated clinical use: An in vitro study.
     J Prosthet Dent. 2022;128:205.
     PubMed     Abstract available
     
     
     
445. YAO Y, Lin Z, Yang X
     Implant placement in the pterygoid region with dynamically navigated surgery: A clinical report.
     J Prosthet Dent. 2022;128:125-129.
     PubMed     Abstract available
     
     
     
446. KESSLER A, Dosch M, Reymus M, Folwaczny M, et al
     Influence of 3D-printing method, resin material, and sterilization on the accuracy of virtually designed surgical implant guides.
     J Prosthet Dent. 2022;128:196-204.
     PubMed     Abstract available
     
     
     
447. PATODIA C, Sutton A, Gozalo D, Font K, et al
     Cost and complications associated with implant-supported overdentures with a resilient-attachment system: A retrospective study.
     J Prosthet Dent. 2022;128:181-186.
     PubMed     Abstract available
     
     
     
448. ABLE FB, Campanha NH, Younes IA, Sartori IAM, et al
     Evaluation of the intaglio surface shape of implant-supported complete-arch maxillary prostheses and its association with biological complications: An analytical cross-sectional study.
     J Prosthet Dent. 2022;128:174-180.
     PubMed     Abstract available
     
     
     
449. XIAO W, Chen Y, Chu C, Dard MM, et al
     Influence of implant location on titanium-zirconium alloy narrow-diameter implants: A 1-year prospective study in smoking and nonsmoking populations.
     J Prosthet Dent. 2022;128:159-166.
     PubMed     Abstract available
     
     
     July 2022
450. PEREIRA MMA, Dini C, Souza JGS, Barao VAR, et al
     Industry support for dental implant research: A metatrend study of industry partnership in the development of new technologies.
     J Prosthet Dent. 2022 Jul 7. pii: S0022-3913(22)00355.
     PubMed     Abstract available
     
     
     
451. PACINELLI A
     Response to the letter to the Editor regarding "A technique for identifying implant abutment screw heads and corresponding implant drivers by using colored polytetrafluorethylene tape".
     J Prosthet Dent. 2022;128:116-117.
     PubMed    
     
     
     
452. SHOR A, Janakievski J
     Comments regarding: Pacinelli A, Bekov G, Nat N, Guerrero D. A technique for identifying implant abutment screw heads and corresponding implant drivers by using colored polytetrafluorethylene tape. J Prosthet Dent 2022;127:59-60.
     J Prosthet Dent. 2022;128:115-116.
     PubMed    
     
     
     
453. APONTE-WESSON R, Knott J, Montgomery P, Chambers MS, et al
     Floor of mouth prosthesis with removable depressible tongue: A clinical report.
     J Prosthet Dent. 2022;128:107-111.
     PubMed     Abstract available
     
     
     
454. LEE SJ, Jamjoom FZ, Le T, Radics A, et al
     A clinical study comparing digital scanning and conventional impression making for implant-supported prostheses: A crossover clinical trial.
     J Prosthet Dent. 2022;128:42-48.
     PubMed     Abstract available
     
     
     
455. ZIMMERMANN D, Ferreira de Almeida DC, Velloso G, Moraschini V, et al
     Digital replication of the peri-implant soft tissue contour of implant-supported crowns: A dental technique.
     J Prosthet Dent. 2022;128:8-12.
     PubMed     Abstract available
     
     
     
456. GAUR V, Patel K, Palka L
     An implant-supported prosthetic rehabilitation of a patient with a bilateral subtotal maxillectomy defect secondary to rhino-orbital-cerebral mucormycosis: A clinical report of a graftless approach.
     J Prosthet Dent. 2022;128:101-106.
     PubMed     Abstract available
     
     
     
457. GEHRKE SA, Dedavid BA, Prados-Frutos JC
     Effects of different switched or not-switched implant and abutment platform designs and marginal bone loss on fracture strength: An in vitro study.
     J Prosthet Dent. 2022;128:55-62.
     PubMed     Abstract available
     
     
     
458. PIMENTA J, Szmukler-Moncler S, Raigrodski AJ
     Physical characterization of 3 implant systems made of distinct materials with distinct surfaces.
     J Prosthet Dent. 2022;128:63-72.
     PubMed     Abstract available
     
     
     June 2022
459. BEDROSSIAN EA
     Complete digital workflow for complete arch implant therapy: Fact or fiction?
     J Prosthet Dent. 2022;127:821-822.
     PubMed     Abstract available
     
     
     
460. ARIAS SR, Londono J, Hemati A
     A method for fabrication of extraoral verification template for implant master cast.
     J Prosthet Dent. 2022;127:943-944.
     PubMed    
     
     
     
461. ALDHOHRAH T, Mashrah MA, Wang Y
     Effect of 2-implant mandibular overdenture with different attachments and loading protocols on peri-implant health and prosthetic complications: A systematic review and network meta-analysis.
     J Prosthet Dent. 2022;127:832-844.
     PubMed     Abstract available
     
     
     
462. LIM JH, Shin SH, Nam NE, Bayarsaikhan E, et al
     Sleeve insert scan body to predict implant placement position by using implant surgical guides: A dental technique.
     J Prosthet Dent. 2022;127:827-831.
     PubMed     Abstract available
     
     
     
463. RAHMAN AM, Jamayet NB, Nizami MMUI, Johari Y, et al
     Effect of tropical outdoor weathering on the surface roughness and mechanical properties of maxillofacial silicones.
     J Prosthet Dent. 2022;127:937-942.
     PubMed     Abstract available
     
     
     
464. HONORIO TONIN BS, He Y, Ye N, Chew HP, et al
     Effects of tightening torque on screw stress and formation of implant-abutment microgaps: A finite element analysis.
     J Prosthet Dent. 2022;127:882-889.
     PubMed     Abstract available
     
     
     
465. VAG J, Freedman G, Szabo E, Romanszky L, et al
     Cervical tooth anatomy considerations for prefabricated anatomic healing abutment design: A mathematical formulation.
     J Prosthet Dent. 2022;127:852-859.
     PubMed     Abstract available
     
     
     May 2022
466. RAWAL S
     Guided innovations: Robot-assisted dental implant surgery.
     J Prosthet Dent. 2022 May 25. pii: S0022-3913(22)00212.
     PubMed     Abstract available
     
     
     
467. WANG X, Shujaat S, Shaheen E, Jacobs R, et al
     Quality and haptic feedback of three-dimensionally printed models for simulating dental implant surgery.
     J Prosthet Dent. 2022 May 2. pii: S0022-3913(22)00201.
     PubMed     Abstract available
     
     
     
468. YU W, Li X, Ma X, Xu X, et al
     Biomechanical analysis of inclined and cantilever design with different implant framework materials in mandibular complete-arch implant restorations.
     J Prosthet Dent. 2022;127:783.
     PubMed     Abstract available
     
     
     
469. IDRIS RI, Shoji Y, Lim TW
     Occlusal force and occlusal contact reestablishment with resin-bonded fixed partial dental prostheses using the Dahl concept: A clinical study.
     J Prosthet Dent. 2022;127:737-743.
     PubMed     Abstract available
     
     
     
470. DASHTI H, Rajati Haghi H, Nakhaei M, Kiamanesh E, et al
     A combined digital technique to fabricate an implant-retained auricular prosthesis for rehabilitation of hemifacial microsomia.
     J Prosthet Dent. 2022;127:807-810.
     PubMed     Abstract available
     
     
     
471. YOUNY LEE SK, Voltidi E, Rasmussen C, Muller O, et al
     Serializing prosthetic rehabilitations to minimize time for patients with a maxillectomy without dentoalveolar support.
     J Prosthet Dent. 2022;127:803-806.
     PubMed     Abstract available
     
     
     
472. LEVEN J, Ali R, Butterworth CJ
     Zygomatic implant-supported prosthodontic rehabilitation of edentulous patients with a history of cleft palate: A clinical report.
     J Prosthet Dent. 2022;127:684-688.
     PubMed     Abstract available
     
     
     
473. YIN L, Zhu Y, Yu H, Qiu L, et al
     Evaluating the efficiency of three methods to clean and disinfect screw- and cement-retained prostheses.
     J Prosthet Dent. 2022;127:775-782.
     PubMed     Abstract available
     
     
     
474. WANG J, Fang M, Xin H, Liu LP, et al
     Use of a digitally guided triple technique for bone reduction, implant placement, and immediate interim prostheses in complete-arch implant surgery.
     J Prosthet Dent. 2022;127:703-708.
     PubMed     Abstract available
     
     
     
475. MORENO SORIANO C, Castaneda Vega P, Estrugo Devesa A, Jane Salas E, et al
     Frequency and type of digital procedures used for the intraoral prosthetic rehabilitation of patients with head and neck cancer: A systematic review.
     J Prosthet Dent. 2022;127:811-815.
     PubMed     Abstract available
     
     
     
476. LIU X, Peng D, Ge Y, Feng H, et al
     Reversal of the intrusion of a natural tooth located between two implant-supported crowns: A 7-year follow-up report.
     J Prosthet Dent. 2022;127:680-683.
     PubMed     Abstract available
     
     
     April 2022
477. CARNEIRO-CAMPOS LE, Freitas-Fernandes LB, Fernandes CP, Zanetta-Barbosa D, et al
     Evaluation of mandibular implant-supported fixed prosthesis retained by 3 dental implants, 1 straight and 2 angled: A retrospective clinical study.
     J Prosthet Dent. 2022 Apr 14. pii: S0022-3913(22)00148.
     PubMed     Abstract available
     
     
     
478. OMAISH HHM, Abdelhamid AM, Neena AF
     Comparison of the strain developed around implants with angled abutments with two reinforced polymeric CAD-CAM superstructure materials: An in vitro comparative study.
     J Prosthet Dent. 2022;127:634.
     PubMed     Abstract available
     
     
     
479. LIM TW, Ab Ghani SM, Mahmud M
     Response to letter to Editor on "Occlusal re-establishment and clinical complications of resin-bonded fixed partial dental prostheses (RBFPDP) cemented at an increased occlusal vertical dimension (OVD)".
     J Prosthet Dent. 2022;127:671-672.
     PubMed    
     
     
     
480. HABIB S, Javed F, Khan FR
     Comments on "Occlusal re-establishment and clinical complications of resin-bonded fixed partial dental prostheses (RBFPDP) cemented at an increased occlusal vertical dimension (OVD)".
     J Prosthet Dent. 2022;127:670-671.
     PubMed    
     
     
     
481. BERNAL G, Salazar C, Sadowsky SJ
     A custom screw-retained implant-supported prosthesis for a patient with amelogenesis imperfecta: An 8-year clinical follow-up.
     J Prosthet Dent. 2022;127:533-537.
     PubMed     Abstract available
     
     
     
482. BORGES GA, Barbin T, Dini C, Maia LC, et al
     Patient-reported outcome measures and clinical assessment of implant-supported overdentures and fixed prostheses in mandibular edentulous patients: A systematic review and meta-analysis.
     J Prosthet Dent. 2022;127:565-577.
     PubMed     Abstract available
     
     
     
483. NEGREIROS WM, Hamilton A, Gallucci GO
     A completely digital workflow for the transition from a failed dentition to interim complete-arch fixed implant-supported prostheses: A clinical report.
     J Prosthet Dent. 2022;127:527-532.
     PubMed     Abstract available
     
     
     
484. ABDEL RAHEEM IM, Darwish RM
     Fabrication of additively manufactured custom impression copings based on stock abutments.
     J Prosthet Dent. 2022;127:560-564.
     PubMed     Abstract available
     
     
     
485. SINGH K, Dua P, Prakash P, Kumar RV, et al
     Custom-fabricated nasal conformers and surgical stents in the management of midfacial acid burn injuries: A clinical report.
     J Prosthet Dent. 2022;127:660-663.
     PubMed     Abstract available
     
     
     
486. HONG SJ, Lee H, Lee YY, Kwon KR, et al
     Retention force and stress distribution analysis of the cementless double crown-type implant-supported prosthesis.
     J Prosthet Dent. 2022;127:626-633.
     PubMed     Abstract available
     
     
     
487. RONG R, Lin TY, Sa Y
     Using an existing digital surgical guide and used burs as aids for a complete-arch implant impression.
     J Prosthet Dent. 2022;127:664-666.
     PubMed    
     
     
     
488. CHANG HC, Chang CH, Li HY, Wang CH, et al
     Biomechanical analysis of the press-fit effect in a conical Morse taper implant system by using an in vitro experimental test and finite element analysis.
     J Prosthet Dent. 2022;127:601-608.
     PubMed     Abstract available
     
     
     
489. POLARA G, Pistone F, Giorgio Alfredo S
     Digital immediate tooth restoration: Fabricating acrylic resin interim crowns from CBCT scans for immediate implant-supported prostheses: A case series.
     J Prosthet Dent. 2022;127:578-584.
     PubMed     Abstract available
     
     
     
490. KHAMIS MM, Zakaria NH
     Effect of screw access channel on the fracture rate of lithium disilicate cement-retained implant-supported posterior crowns.
     J Prosthet Dent. 2022;127:618-625.
     PubMed     Abstract available
     
     
     March 2022
491. SUN F, Cheng W, Zhao B, Lin Z, et al
     Fatigue properties of plasma nitriding for dental implant application.
     J Prosthet Dent. 2022 Mar 23. pii: S0022-3913(22)00068.
     PubMed     Abstract available
     
     
     
492. VERMA M, Faraz F, Bhardwaj S, Sood A, et al
     Evaluation of safety and efficacy of locally developed dental implants: A noninferiority randomized controlled trial.
     J Prosthet Dent. 2022 Mar 9. pii: S0022-3913(22)00056.
     PubMed     Abstract available
     
     
     
493. ARMENTIA M, Abasolo M, Coria I, Sainitier N, et al
     Effect of the geometry of butt-joint implant-supported restorations on the fatigue life of prosthetic screws.
     J Prosthet Dent. 2022;127:477.
     PubMed     Abstract available
     
     
     
494. VILLARROEL M, Esquivel J
     The biotransfer approach: The use of an alveolar cast die for the fabrication of the emergence profile on implant-supported interim restorations.
     J Prosthet Dent. 2022;127:404-407.
     PubMed     Abstract available
     
     
     
495. BOMPOLAKI D, Edmondson SA, Katancik JA
     Interproximal contact loss between implant-supported restorations and adjacent natural teeth: A retrospective cross-sectional study of 83 restorations with an up to 10-year follow-up.
     J Prosthet Dent. 2022;127:418-424.
     PubMed     Abstract available
     
     
     
496. VITOMIR KS, Filip I, Vojkan L, Igor D, et al
     Survival rate of disk and screw-type implants used for the retention of extraoral prostheses.
     J Prosthet Dent. 2022;127:499-507.
     PubMed     Abstract available
     
     
     
497. KO KH, Huh YH, Park CJ, Cho LR, et al
     Effect of materials on axial displacement and internal discrepancy of cement-retained implant-supported prostheses.
     J Prosthet Dent. 2022;127:462-469.
     PubMed     Abstract available
     
     
     
498. LIU X, Liu J, Feng H, Pan S, et al
     Accuracy of a milled digital implant surgical guide: An in vitro study.
     J Prosthet Dent. 2022;127:453-461.
     PubMed     Abstract available
     
     
     
499. FU X, Yang J, Luo J, Zhang Y, et al
     Three-dimensional facial esthetics-driven computer-assisted osteotomy and implant placement for immediate restoration of a failing dentition with a protruded maxilla.
     J Prosthet Dent. 2022;127:392-397.
     PubMed     Abstract available
     
     
     
500. ORTEGA-MARTINEZ J, Delgado LM, Ortiz-Hernandez M, Punset M, et al
     In vitro assessment of PEEK and titanium implant abutments: Screw loosening and microleakage evaluations under dynamic mechanical testing.
     J Prosthet Dent. 2022;127:470-476.
     PubMed     Abstract available
     
     
     
501. NEGREIROS WA, Teixeira RR, Peixoto RF, Regis RR, et al
     The challenge of managing oral maxillofacial rehabilitation with quality and cost-benefit.
     J Prosthet Dent. 2022;127:508-514.
     PubMed     Abstract available
     
     
     
502. GOMES JML, Limirio JPJO, Lemos CAA, Moraes SLD, et al
     Response to the "Letter to the Editor" regarding the article: Pellizzer EP, et al. The influence of crown-to-implant ratio in single crowns on clinical outcomes: A systematic review and meta-analysis. J Prosthet Dent 2021;126:497-502.
     J Prosthet Dent. 2022;127:524-525.
     PubMed    
     
     
     
503. SADOWSKY SJ
     Comments regarding: Pellizzer EP, Marcela de Luna Gomes J, Araujo Lemos CA, Minatel L, Justino de Oliveira Limirio JP, Dantas de Moraes SL. The influence of crown-to-implant ratio in single crowns on clinical outcomes: A systematic review and meta-ana
     J Prosthet Dent. 2022;127:524.
     PubMed    
     
     
     
504. LEE JH
     Design concept to facilitate the positioning of a custom abutment on an implant.
     J Prosthet Dent. 2022;127:517-519.
     PubMed    
     
     
     February 2022
505. GOODACRE BJ
     Digital workflow for 3D printed implant surgical guides.
     J Prosthet Dent. 2022;127:205.
     PubMed    
     
     
     
506. DA SILVA GG, Shimano MVW, Macedo AP, da Costa Valente ML, et al
     In vitro assessment of polyetheretherketone for an attachment component for an implant-retained overdenture.
     J Prosthet Dent. 2022;127:319.
     PubMed     Abstract available
     
     
     
507. DE SOUZA RENDOHL E, Brandt WC
     Author response to letter to the editor about the article "Stress distribution with extra-short implants in an angled frictional system: A finite element analysis study".
     J Prosthet Dent. 2022;127:379-380.
     PubMed    
     
     
     
508. CECATO RC, de Souza Wiggers W, Miura A
     Letter to the editor about the article "Stress distribution with extra-short implants in an angled frictional system: A finite element analysis study".
     J Prosthet Dent. 2022;127:375-379.
     PubMed    
     
     
     
509. GARCIA-GONZALEZ M, Gonzalez-Gonzalez I, Garcia-Garcia I, Blason-Gonzalez S, et al
     Effect of abutment finish lines on the mechanical behavior and marginal fit of screw-retained implant crowns: An in vitro study.
     J Prosthet Dent. 2022;127:318.
     PubMed     Abstract available
     
     
     
510. MARTIN-ORTEGA N, Sallorenzo A, Casajus J, Cervera A, et al
     Fracture resistance of additive manufactured and milled implant-supported interim crowns.
     J Prosthet Dent. 2022;127:267-274.
     PubMed     Abstract available
     
     
     
511. REVILLA-LEON M, Abaei DS, Tittle A, Zandinejad A, et al
     Additively manufactured implant abutment screw-access guide to remove a cement-retained implant crown: A technique.
     J Prosthet Dent. 2022;127:219-222.
     PubMed     Abstract available
     
     
     
512. ZHANG J, Chen L, Tang H, Zhang R, et al
     An alternative technique for fabricating an implant-supported interim prosthesis by using a fully digital approach.
     J Prosthet Dent. 2022;127:228-232.
     PubMed     Abstract available
     
     
     
513. LEE JH
     Digital approach to fabricating a retrofitted abutment for reuse of an existing implant-supported fixed partial denture after the failure of an implant.
     J Prosthet Dent. 2022;127:223-227.
     PubMed     Abstract available
     
     
     
514. CHEN X, Wang F, Sun F, Zhang L, et al
     Digital fabrication of an adult speech aid prosthesis by using a 3-dimensionally printed polyetheretherketone framework.
     J Prosthet Dent. 2022;127:358-361.
     PubMed     Abstract available
     
     
     
515. SILVA GC
     A straightforward technique to obtain a subgingival nonglazed polished zirconia area in monolithic implant-supported prostheses.
     J Prosthet Dent. 2022;127:368-370.
     PubMed    
     
     
     
516. YU P, Zhi Li, Tan X, Yu H, et al
     Effect of sealing gel on the microleakage resistance and mechanical behavior during dynamic loading of 3 implant systems.
     J Prosthet Dent. 2022;127:308-317.
     PubMed     Abstract available
     
     

Thank you for your interest in scientific medicine.

AMEDEO Dental Implants is free of charge.